Backup and Restore

If you are worried about data loss, and of course you should be, you need a way to back up your Solr indexes so that you can recover quickly in case of catastrophic failure.

Solr provides two approaches to backing up and restoring Solr cores or collections, depending on how you are running Solr. If you run a SolrCloud cluster, you will use the Collections API. If you run a user-managed cluster or a single-node installation, you will use the replication handler.

Backups (and Snapshots) capture data that has been hard committed. Committing changes using softCommit=true may result in changes that are visible in search results but not included in subsequent backups.

Likewise, committing changes using openSearcher=false may result in changes committed to disk and included in subsequent backups, even if they are not currently visible in search results.

SolrCloud Clusters

Support for backups in SolrCloud is provided with the Collections API. This allows the backups to be generated across multiple shards, and restored to the same number of shards and replicas as the original collection.

SolrCloud Backup/Restore requires a shared file system mounted at the same path on all nodes, or HDFS.

Four different API commands are supported:

  • action=BACKUP: This command backs up Solr indexes and configurations. More information is available in the section Backup Collection.

  • action=RESTORE: This command restores Solr indexes and configurations. More information is available in the section Restore Collection.

  • action=LISTBACKUP: This command lists the backup points available at a specified location, displaying metadata for each. More information is available in the section List Backups.

  • action=DELETEBACKUP: This command allows deletion of backup files or whole backups. More information is available in the section Delete Backups.

User-Managed Clusters and Single-Node Installations

Backups and restoration uses Solr’s replication handler. Out of the box, Solr includes implicit support for replication so this API can be used. Configuration of the replication handler can, however, be customized by defining your own replication handler in solrconfig.xml. For details on configuring the replication handler, see the section Configuring the ReplicationHandler.

Backup API

The backup API requires sending a command to the /replication handler to back up the system.

You can trigger a back-up with an HTTP command like this (replace "gettingstarted" with the name of the core you are working with):

Backup API Example
http://localhost:8983/solr/gettingstarted/replication?command=backup

The backup command is an asynchronous call, and it will represent data from the latest index commit point. All indexing and search operations will continue to be executed against the index as usual.

Only one backup call can be made against a core at one time. While an ongoing backup operation is happening subsequent calls for restoring will throw an exception.

The backup request can also take the following additional parameters:

location

Optional

Default: none

The path where the backup will be created. If the path is not absolute then the backup path will be relative to Solr’s instance directory.

name

Optional

Default: none

The snapshot will be created in a directory called snapshot.<name>. If a name is not specified then the directory name will have the following format: snapshot.<_yyyyMMddHHmmssSSS_>.

numberToKeep

Optional

Default: none

The number of backups to keep. If maxNumberOfBackups has been specified on the replication handler in solrconfig.xml, maxNumberOfBackups is always used and attempts to use numberToKeep will cause an error. Also, this parameter is not taken into consideration if the backup name is specified. More information about maxNumberOfBackups can be found in the section Configuring the ReplicationHandler.

repository

Optional

Default: none

The name of the repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.

commitName

Optional

Default: none

The name of the commit which was used while taking a snapshot using the CREATESNAPSHOT command.

Backup Status

The backup operation can be monitored to see if it has completed by sending the details command to the /replication handler, as in this example:

Status API Example
http://localhost:8983/solr/gettingstarted/replication?command=details&wt=xml
Output Snippet
<lst name="backup">
  <str name="startTime">2022-02-11T17:19:33.271461700Z</str>
  <int name="fileCount">10</int>
  <int name="indexFileCount">10</int>
  <str name="status">success</str>
  <str name="snapshotCompletedAt">2022-02-11T17:19:34.363859100Z</str>
  <str name="endTime">2022-02-11T17:19:34.363859100Z</str>
  <str name="snapshotName">my_backup</str>
</lst>

If it failed then a snapShootException will be sent in the response.

Restore API

Restoring the backup requires sending the restore command to the /replication handler, followed by the name of the backup to restore.

You can restore from a backup with a command like this:

Example Usage
http://localhost:8983/solr/gettingstarted/replication?command=restore&name=backup_name

This will restore the named index snapshot into the current core. Searches will start reflecting the snapshot data once the restore is complete.

The restore request can take these additional parameters:

location

Optional

Default: none

The location of the backup snapshot file. If not specified, it looks for backups in Solr’s data directory.

name

Optional

Default: none

The name of the backup index snapshot to be restored. If the name is not provided it looks for backups with snapshot.<timestamp> format in the location directory. It picks the latest timestamp backup in that case.

repository

Optional

Default: none

The name of the repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.

The restore command is an asynchronous call. Once the restore is complete the data reflected will be of the backed up index which was restored.

Only one restore call can can be made against a core at one point in time. While an ongoing restore operation is happening subsequent calls for restoring will throw an exception.

Restore Status API

You can also check the status of a restore operation by sending the restorestatus command to the /replication handler, as in this example:

Status API Example
http://localhost:8983/solr/gettingstarted/replication?command=restorestatus&wt=xml
Status API Output
<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">0</int>
  </lst>
  <lst name="restorestatus">
    <str name="snapshotName">snapshot.<name></str>
    <str name="status">success</str>
  </lst>
</response>

The status value can be "In Progress", "success" or "failed". If it failed then an "exception" will also be sent in the response.

CREATE: Create a Snapshot

The snapshot functionality is different from the backup functionality as the index files aren’t copied anywhere. The index files are snapshotted in the same index directory and can be referenced while taking backups.

You can trigger a snapshot command with an HTTP command like this (replace "techproducts" with the name of the core you are working with):

V1 API

curl -X POST http://localhost:8983/solr/admin/cores?action=CREATESNAPSHOT&core=techproducts&commitName=commit1

V2 API

With the v2 API, the core and snapshot names are part of the path instead of query parameters.

curl -X POST http://localhost:8983/api/cores/techproducts/snapshots/commit1

CREATE Parameters

The CREATE action allows the following parameters:

async

Optional

Default: none

Request ID to track this action which will be processed asynchronously.

CREATE Response

The response will include the status of the request, the core name, snapshot name, index directory path, snapshot generation, and a list of file names. If the status is anything other than "success", an error message will explain why the request failed.

List: List All Snapshots for a Particular Core

You can trigger a list snapshot command with an HTTP command like this (replace "techproducts" with the name of the core you are working with):

V1 API

curl http://localhost:8983/solr/admin/cores?action=LISTSNAPSHOTS&core=techproducts&commitName=commit1

V2 API

With the v2 API the core name appears in the path, instead of as a query parameter.

curl http://localhost:8983/api/cores/techproducts/snapshots

LIST Parameters

The LIST action allows the following parameters:

async

Optional

Default: none

Request ID to track this action which will be processed asynchronously.

LIST Response

The response will include the status of the request and all existing snapshots for the core. If the status is anything other than "success", an error message will explain why the request failed.

DELETE: Delete a Snapshot

You can trigger a delete snapshot with an HTTP command like this (replace "techproducts" with the name of the core you are working with):

V1 API

curl http://localhost:8983/solr/admin/cores?action=DELETESNAPSHOT&core=techproducts&commitName=commit1

V2 API

With the v2 API, the core and snapshot names are part of the path instead of query parameters.

curl -X DELETE http://localhost:8983/api/cores/techproducts/snapshots/commit1

DELETE Parameters

The DELETE action allows the following parameters:

async

Optional

Default: none

Request ID to track this action which will be processed asynchronously.

DELETE Response

The response will include the status of the request, the core name, and the name of the snapshot that was deleted. If the status is anything other than "success", an error message will explain why the request failed.

Backup/Restore Storage Repositories

Solr provides a repository abstraction to allow users to backup and restore their data to a variety of different storage systems. For example, a Solr cluster running on a local filesystem (e.g., EXT3) can store backup data on the same disk, on a remote network-mounted drive, in HDFS, or even in some popular "cloud storage" providers, depending on the 'repository' implementation chosen. Solr offers multiple different repository implementations out of the box (LocalFileSystemRepository, HdfsBackupRepository, GCSBackupRepository and S3BackupRepository), and allows users to create plugins for their own storage systems as needed. It is also possible to create a DelegatingBackupRepository that delegates to another BackupRepository and adds or modifies some behavior on top of it.

Users can define any number of repositories in their solr.xml file. The backup and restore APIs described above allow users to select which of these definitions they want to use at runtime via the repository parameter. When no repository parameter is specified, the local filesystem repository is used as a default.

Repositories are defined by a <repository> tag nested under a <backup> parent tag. All <repository> tags must have a name attribute (defines the identifier that users can reference later to select this repository) and a class attribute (containing the full Java classname that implements the repository). They may also have a boolean default attribute, which may be true on at most one repository definition. Any children under the <repository> tag are passed as additional configuration to the repository, allowing repositories to read their own implementation-specific configuration.

Information on each of the repository implementations provided with Solr is provided below.

By default, all the repository implementations verify the integrity of the index files before they are copied to the destination. However, it is possible to disable this integrity check by setting the optional configuration property verifyChecksum.

verifyChecksum

Optional

Default: true

Defines whether the backup repository should check the index files integrity before copying them to the destination. Set false to disable the checksum verification, in order to verify the integrity in a different way, for example if the files are encrypted.

LocalFileSystemRepository

LocalFileSystemRepository stores and retrieves backup files anywhere on the accessible filesystem. Files can be stored on "local" disk, or on network-mounted drives that appear local to the filesystem.

SolrCloud administrators looking to use LocalFileSystemRepository in tandem with network drives should be careful to make the drive available at the same location on each Solr node. Strictly speaking, the mount only needs to be present on the node doing the backup (or restore), and on the node currently serving as the "Overseer". However since the "overseer" role often moves from node to node in a cluster, it is generally recommended that backup drives be added to all nodes uniformly.

A LocalFileSystemRepository instance is used as a default by any backup and restore commands that don’t explicitly provide a repository parameter or have a default specified in solr.xml.

LocalFileSystemRepository accepts the following configuration option:

location

Optional

Default: none

A valid file path (accessible to Solr locally) to use for backup storage and retrieval. Used as a fallback when users don’t provide a location parameter in their Backup or Restore API commands.

An example configuration using this property can be found below.

<backup>
  <repository name="local_repo" class="org.apache.solr.core.backup.repository.LocalFileSystemRepository">
    <str name="location">/solr/backup_data</str>
  </repository>
</backup>

HdfsBackupRepository

Stores and retrieves backup files from HDFS directories.

This is provided via the hdfs Solr Module that needs to be enabled before use.

HdfsBackupRepository accepts the following configuration options:

solr.hdfs.buffer.size

Optional

Default: 4096 kilobytes

The size, in bytes, of the buffer used to transfer data to and from HDFS. Better throughput is often attainable with a larger buffer, where memory allows.

solr.hdfs.home

Required

Default: none

A HDFS URI in the format hdfs://<host>:<port>/<hdfsBaseFilePath> that points Solr to the HDFS cluster to store (or retrieve) backup files on.

solr.hdfs.permissions.umask-mode

Optional

Default: none

A permission umask used when creating files in HDFS.

location

Optional

Default: none

A valid directory path on the HDFS cluster to use for backup storage and retrieval. Used as a fallback when users don’t provide a location parameter in their Backup or Restore API commands.

An example configuration using these properties can be found below:

<backup>
  <repository name="hdfs" class="org.apache.solr.hdfs.backup.repository.HdfsBackupRepository" default="false">
    <str name="solr.hdfs.home">hdfs://some_hdfs_host:1234/solr/backup/data</str>
    <int name="solr.hdfs.buffer.size">8192</int>
    <str name="solr.hdfs.permissions.umask-mode">0022</str>
    <str name="location">/default/hdfs/backup/location</str>
  </repository>
</backup>

GCSBackupRepository

Stores and retrieves backup files in a Google Cloud Storage ("GCS") bucket.

This is provided via the gcs-repository Solr Module that needs to be enabled before use.

GCSBackupRepository accepts the following options for overall configuration:

gcsBucket

Optional

Default: see description

The GCS bucket to read and write all backup files to. If not specified, GCSBackupRepository will use the value of the GCS_BUCKET environment variable. If both values are absent, the value solrBackupsBucket will be used as a default.

gcsCredentialPath

Optional

Default: see description

A path on the local filesystem (accessible by Solr) to a Google Cloud service account key file. If not specified, GCSBackupRepository will use the value of the GCS_CREDENTIAL_PATH environment variable. If both values are absent and Solr is running inside GCP, the GCS client will attempt to authenticate using GCP’s "Compute Engine Metadata Server" or Workload Identity features. If both values are absent and Solr is running outside of GCP, it will be unable to authenticate and any backup or restore operations will fail.

location

Optional

Default: none

A valid "directory" path in the given GCS bucket to us for backup storage and retrieval. (GCS uses a flat storage model, but Solr’s backup functionality names blobs in a way that approximates hierarchical directory storage.) Used as a fallback when user’s don’t provide a location parameter in their Backup or Restore API commands.

In addition to these properties for overall configuration, GCSBackupRepository gives users detailed control over the client used to communicate with GCS. These properties are unlikely to interest most users, but may be valuable for those looking to micromanage performance or subject to a flaky network.

GCSBackupRepository accepts the following advanced client-configuration options:

gcsWriteBufferSizeBytes

Optional

Default: 16777216 bytes (16 MB)

The buffer size, in bytes, to use when sending data to GCS.

gcsReadBufferSizeBytes

Optional

Default: 2097152 bytes (2 MB)

The buffer size, in bytes, to use when copying data from GCS.

gcsClientHttpConnectTimeoutMillis

Optional

Default: 2000 milliseconds

The connection timeout, in milliseconds, for all HTTP requests made by the GCS client. 0 may be used to request an infinite timeout. A negative integer, or not specifying a value at all, will result in the default value.

gcsClientHttpReadTimeoutMillis

Optional

Default: 20000 milliseconds

The read timeout, in milliseconds, for reading data on an established connection. 0 may be used to request an infinite timeout. A negative integer, or not specifying a value at all, will result in the default value.

gcsClientMaxRetries

Optional

Default: 10

The maximum number of times to retry an operation upon failure. The GCS client will retry operations until this value is reached, or the time spent across all attempts exceeds gcsClientMaxRequestTimeoutMillis. 0 may be used to specify that no retries should be done.

gcsClientMaxRequestTimeoutMillis

Optional

Default: 30000 milliseconds

The maximum amount of time to spend on all retries of an operation that has failed. The GCS client will retry operations until either this timeout has been reached, or until gcsClientMaxRetries attempts have failed.

gcsClientHttpInitialRetryDelayMillis

Optional

Default: 1000 milliseconds

The time, in milliseconds, to delay before the first retry of a HTTP request that has failed. This value also factors in to subsequent retries - see the gcsClientHttpRetryDelayMultiplier description below for more information. If gcsClientMaxRetries is 0, this property is ignored as no retries are attempted.

gcsClientHttpRetryDelayMultiplier

Optional

Default: 1.0

A floating-point multiplier used to scale the delay between each successive retry of a failed HTTP request.. The greater this number is, the more quickly the retry delay compounds and scales.

Under the covers, the GSC client uses an exponential backoff strategy between retries, governed by the formula: . The first retry will have a delay of , the second a delay of , the third a delay of , and so on.

If not specified the value 1.0 is used by default, ensuring that gcsClientHttpInitialRetryDelayMillis is used between each retry attempt.

gcsClientHttpMaxRetryDelayMillis

Optional

Default: 30000 milliseconds

The maximum delay, in milliseconds, between retry attempts on a failed HTTP request. This is commonly used to cap the exponential growth in retry-delay that occurs over multiple attempts. See the gcsClientHttpRetryDelayMultiplier description above for more information on how each delay is calculated when not subject to this maximum.

gcsClientRpcInitialTimeoutMillis

Optional

Default: 10000 milliseconds

The time, in milliseconds, to wait on a RPC request before timing out. This value also factors in to subsequent retries - see the gcsClientRpcTimeoutMultiplier description below for more information. If gcsClientMaxRetries is 0, this property is ignored as no retries are attempted.

gcsClientRpcTimeoutMultiplier

Optional

Default: 1.0

A floating-point multiplier used to scale the timeout on each successive attempt of a failed RPC request. The greater this number is, the more quickly the timeout compounds and scales.

Under the covers, the GSC client uses an exponential backoff strategy for RPC timeouts, governed by the formula: . The first retry will have a delay of , the second a delay of , the third a delay of , and so on.

If not specified the value 1.0 is used by default, ensuring that gcsClientRpcInitialTimeoutMillis is used on each RPC attempt.

gcsClientRpcMaxTimeoutMillis

Optional

Default: 30000 milliseconds

The maximum timeout, in milliseconds, for retry attempts of a failed RPC request. This is commonly used to cap the exponential growth in timeout that occurs over multiple attempts. See the gcsClientRpcTimeoutMultiplier description above for more information on how each timeout is calculated when not subject to this maximum.

An example configuration using the overall and GCS-client properties can be seen below:

<backup>
  <repository name="gcs_backup" class="org.apache.solr.gcs.GCSBackupRepository" default="false">
    <str name="gcsBucket">solrBackups</str>
    <str name="gcsCredentialPath">/local/path/to/credential/file</str>
    <str name="location">/default/gcs/backup/location</str>

    <int name="gcsClientMaxRetries">5</int>
    <int name="gcsClientHttpInitialRetryDelayMillis">1500</int>
    <double name="gcsClientHttpRetryDelayMultiplier">1.5</double>
    <int name="gcsClientHttpMaxRetryDelayMillis">10000</int>
  </repository>
</backup>

S3BackupRepository

Stores and retrieves backup files in an Amazon S3 bucket.

This is provided via the s3-repository Solr Module that needs to be enabled before use.

This plugin uses the default AWS credentials provider chain, so ensure that your credentials are set appropriately (e.g., via env var, or in ~/.aws/credentials, etc.).

There are a few nuances to using the location option with the S3 Repository. The location option specifies the sub-directory to store backup information in.

Location Format

When using the Backup & Restore Collections API Calls, the location option can be presented in a number of ways:

  • dir/in/bucket

  • /dir/in/bucket

  • s3:/dir/in/bucket

  • s3://dir/in/bucket

    All the above options will resolve to the same directory in your S3 Bucket: dir/in/bucket.

Pre-Creation

The location must already exist within your S3 bucket before you can preform any backup operations with that location.

Please note that the directory you create in S3 cannot begin with a /, as locations are stripped of any / prefix (shown in Location Format).

Empty Location

If you do not want to use a sub-directory within your bucket to store your backup, you can use any of the following location options: /, s3:/, s3://. However the location option is mandatory and you will recieve an error when trying to perform backup operations without it.

An example configuration to enable S3 backups and restore can be seen below:

<backup>
  <repository name="s3" class="org.apache.solr.s3.S3BackupRepository" default="false">
    <str name="s3.bucket.name">my-s3-bucket</str>
    <str name="s3.region">us-west-2</str>
  </repository>
</backup>

S3BackupRepository accepts the following options (in solr.xml) for overall configuration:

s3.bucket.name

Optional

Default: none

The S3 bucket to read and write all backup files to. Can be overridden by setting S3_BUCKET_NAME environment variable.

s3.profile

Optional

Default: none

A profile to load AWS settings for from config files. Profiles allow for independent settings for multiple S3Repositories. Can be overridden by setting AWS_PROFILE environment variable or -Daws.profile system property. For more information on setting configuration per-profile, refer to the AWS Java SDK documentation

s3.region

Optional

Default: none

A valid Amazon S3 region string where your bucket is provisioned. You must have read and write permissions for this bucket. For a full list of regions, please reference the S3 documentation. Can be overridden by setting S3_REGION environment variable, or setting the region in the AWS Configuration file.

s3.endpoint

Optional

Default: none

Explicit S3 endpoint. Not needed under normal operations when using AWS S3 (the S3 client can infer the endpoint from the s3.region). This parameter is helpful if using a mock S3 framework and want to explicitly override where S3 requests are routed, such as when using S3Mock. Can be overridden by setting S3_ENDPOINT environment variable.

You can use the s3.endpoint option to use this BackupRepository with s3-compatible endpoints. Beware that not all s3-compatible endpoints will work with the S3BackupRepository. Minio is an example of an s3-compatible endpoint that does not work with the S3BackupRepository. The S3BackupRepository is only guaranteed to be compatible with AWS S3 and S3Mock.

s3.proxy.url

Optional

Default: none

Proxy url for the S3 client to route requests through, if desired. The url should include <scheme>://<hostname>:<port>, however port and scheme may be inferred if missing.

If used, this will override any system proxy settings that are set. There is no need to disable the s3.proxy.useSystemSettings option. If you need to use a proxy username, password or nonProxyHosts, please use the system properties listed below.

s3.proxy.useSystemSettings

Optional

Default: true

By default use the system proxy settings if they are set when communicating with the S3 server. The supported proxy system properties are:

  • http.proxyHost

  • http.proxyPort

  • http.nonProxyHosts

  • http.proxyUser

  • http.proxyPassword

s3.retries.disable

Optional

Default: false

Disable retries for all S3 operations. This is not recommended.

S3 Client Configuration

The AWS Java SDKs provide many ways of setting the configuration for an S3 Client. The Solr S3Repository allows these configurations to be set via:

  • Environment Variables

  • Java System Properties

  • AWS Configuration File (possibly per-profile)

These options include:

  • Region

  • Access Keys

  • Retries

    • RetryMode (LEGACY, STANDARD, ADAPTIVE)

    • Max Attempts