Collection Management Commands

A collection is a single logical index that uses a single Solr configuration file (solrconfig.xml) and a single index schema.

CREATE: Create a Collection

/admin/collections?action=CREATE&name=name

CREATE Parameters

The CREATE action allows the following parameters:

name
The name of the collection to be created. This parameter is required.
router.name

The router name that will be used. The router defines how documents will be distributed among the shards. Possible values are implicit or compositeId, which is the default.

The implicit router does not automatically route documents to different shards. Whichever shard you indicate on the indexing request (or within each document) will be used as the destination for those documents.

The compositeId router hashes the value in the uniqueKey field and looks up that hash in the collection’s clusterstate to determine which shard will receive the document, with the additional ability to manually direct the routing.

When using the implicit router, the shards parameter is required. When using the compositeId router, the numShards parameter is required.

For more information, see also the section Document Routing.

numShards
The number of shards to be created as part of the collection. This is a required parameter when the router.name is compositeId.
shards
A comma separated list of shard names, e.g., shard-x,shard-y,shard-z. This is a required parameter when the router.name is implicit.
replicationFactor

The number of replicas to be created for each shard. The default is 1.

This will create a NRT type of replica. If you want another type of replica, see the tlogReplicas and pullReplica parameters below. See the section Types of Replicas for more information about replica types.

nrtReplicas
The number of NRT (Near-Real-Time) replicas to create for this collection. This type of replica maintains a transaction log and updates its index locally. If you want all of your replicas to be of this type, you can simply use replicationFactor instead.
tlogReplicas
The number of TLOG replicas to create for this collection. This type of replica maintains a transaction log but only updates its index via replication from a leader. See the section Types of Replicas for more information about replica types.
pullReplicas
The number of PULL replicas to create for this collection. This type of replica does not maintain a transaction log and only updates its index via replication from a leader. This type is not eligible to become a leader and should not be the only type of replicas in the collection. See the section Types of Replicas for more information about replica types.
maxShardsPerNode

When creating collections, the shards and/or replicas are spread across all available (i.e., live) nodes, and two replicas of the same shard will never be on the same node.

If a node is not live when the CREATE action is called, it will not get any parts of the new collection, which could lead to too many replicas being created on a single live node. Defining maxShardsPerNode sets a limit on the number of replicas the CREATE action will spread to each node.

If the entire collection can not be fit into the live nodes, no collection will be created at all. The default maxShardsPerNode value is 1. A value of -1 means unlimited. If a policy is also specified then the stricter of maxShardsPerNode and policy rules apply.

createNodeSet

Allows defining the nodes to spread the new collection across. The format is a comma-separated list of node_names, such as localhost:8983_solr,localhost:8984_solr,localhost:8985_solr.

If not provided, the CREATE operation will create shard-replicas spread across all live Solr nodes.

Alternatively, use the special value of EMPTY to initially create no shard-replica within the new collection and then later use the ADDREPLICA operation to add shard-replicas when and where required.

createNodeSet.shuffle

Controls whether or not the shard-replicas created for this collection will be assigned to the nodes specified by the createNodeSet in a sequential manner, or if the list of nodes should be shuffled prior to creating individual replicas.

A false value makes the results of a collection creation predictable and gives more exact control over the location of the individual shard-replicas, but true can be a better choice for ensuring replicas are distributed evenly across nodes. The default is true.

This parameter is ignored if createNodeSet is not also specified.

collection.configName

Defines the name of the configuration (which must already be stored in ZooKeeper) to use for this collection.

If not provided, Solr will use the configuration of _default configset to create a new (and mutable) configset named <collectionName>.AUTOCREATED and will use it for the new collection. When such a collection is deleted, its autocreated configset will be deleted by default when it is not in use by any other collection.

router.field

If this parameter is specified, the router will look at the value of the field in an input document to compute the hash and identify a shard instead of looking at the uniqueKey field. If the field specified is null in the document, the document will be rejected.

Please note that RealTime Get or retrieval by document ID would also require the parameter _route_ (or shard.keys) to avoid a distributed search.

perReplicaState
If true the states of individual replicas will be maintained as individual child of the state.json. default is false
property.name=value
Set core property name to value. See the section Defining core.properties for details on supported properties and values.
autoAddReplicas

When set to true, enables automatic addition of replicas when the number of active replicas falls below the value set for replicationFactor. This may occur if a replica goes down, for example. The default is false, which means new replicas will not be added.

While this parameter is provided as part of Solr’s set of features to provide autoscaling of clusters, it is available even when you have not implemented any other part of autoscaling (such as a policy). See the section SolrCloud Autoscaling Automatically Adding Replicas for more details about this option and how it can be used.

The entries in each core.properties file are vital for Solr to function correctly. Overriding entries can result in unusable collections. Altering these entries by specifying property.name=value is an expert-level option and should only be used if you have a thorough understanding of the consequences.

async
Request ID to track this action which will be processed asynchronously.
rule
Replica placement rules. See the section Rule-based Replica Placement for details.
snitch
Details of the snitch provider. See the section Rule-based Replica Placement for details.
policy
Name of the collection-level policy. See Defining Collection-Specific Policies for details.
waitForFinalState
If true, the request will complete only when all affected replicas become active. The default is false, which means that the API will return the status of the single action, which may be before the new replica is online and active.
withCollection
The name of the collection with which all replicas of this collection must be co-located. The collection must already exist and must have a single shard named shard1. See Colocating collections for more details.
alias
Starting with version 8.1 when a collection is created additionally an alias can be created that points to this collection. This parameter allows specifying the name of this alias, effectively combining this operation with CREATEALIAS

Collections are first created in read-write mode but can be put in readOnly mode using the MODIFYCOLLECTION action.

CREATE Response

The response will include the status of the request and the new core names. If the status is anything other than "success", an error message will explain why the request failed.

Examples using CREATE

Input

http://localhost:8983/solr/admin/collections?action=CREATE&name=newCollection&numShards=2&replicationFactor=1&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">3764</int>
  </lst>
  <lst name="success">
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">3450</int>
      </lst>
      <str name="core">newCollection_shard1_replica1</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">3597</int>
      </lst>
      <str name="core">newCollection_shard2_replica1</str>
    </lst>
  </lst>
</response>

RELOAD: Reload a Collection

/admin/collections?action=RELOAD&name=name

The RELOAD action is used when you have changed a configuration in ZooKeeper.

RELOAD Parameters

name
The name of the collection to reload. This parameter is required.
async
Request ID to track this action which will be processed asynchronously.

RELOAD Response

The response will include the status of the request and the cores that were reloaded. If the status is anything other than "success", an error message will explain why the request failed.

Examples using RELOAD

Input

http://localhost:8983/solr/admin/collections?action=RELOAD&name=newCollection&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">1551</int>
  </lst>
  <lst name="success">
    <lst name="10.0.1.6:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">761</int>
      </lst>
    </lst>
    <lst name="10.0.1.4:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1527</int>
      </lst>
    </lst>
  </lst>
</response>

MODIFYCOLLECTION: Modify Attributes of a Collection

/admin/collections?action=MODIFYCOLLECTION&collection=<collection-name>&<attribute-name>=<attribute-value>&<another-attribute-name>=<another-value>&<yet_another_attribute_name>=

It’s possible to edit multiple attributes at a time. Changing these values only updates the z-node on ZooKeeper, they do not change the topology of the collection. For instance, increasing replicationFactor will not automatically add more replicas to the collection but will allow more ADDREPLICA commands to succeed.

An attribute can be deleted by passing an empty value. For example, yet_another_attribute_name= (with no value) will delete the yet_another_attribute_name parameter from the collection.

MODIFYCOLLECTION Parameters

collection
The name of the collection to be modified. This parameter is required.
attribute=value
Key-value pairs of attribute names and attribute values.

At least one attribute parameter is required.

The attributes that can be modified are:

  • maxShardsPerNode

  • replicationFactor

  • autoAddReplicas

  • collection.configName

  • rule

  • snitch

  • policy

  • withCollection

  • readOnly

  • other custom properties that use a property. prefix

See the CREATE action section above for details on these attributes.

Read-Only Mode

Setting the readOnly attribute to true puts the collection in read-only mode, in which any index update requests are rejected. Other collection-level actions (e.g., adding / removing / moving replicas) are still available in this mode.

The transition from the (default) read-write to read-only mode consists of the following steps:

  • the readOnly flag is changed in collection state,

  • any new update requests are rejected with 403 FORBIDDEN error code (ongoing long-running requests are aborted, too),

  • a forced commit is performed to flush and commit any in-flight updates.

This may potentially take a long time if there are still major segment merges running in the background.

Removing the readOnly property or setting it to false enables the processing of updates and reloads the collection.

LIST: List Collections

Fetch the names of the collections in the cluster.

/admin/collections?action=LIST

Examples using LIST

Input

http://localhost:8983/solr/admin/collections?action=LIST

Output

{
  "responseHeader":{
    "status":0,
    "QTime":2011},
  "collections":["collection1",
    "example1",
    "example2"]}

RENAME: Rename a Collection

/admin/collections?action=RENAME&name=existingName&target=targetName

Renaming a collection sets up a standard alias that points to the underlying collection, so that the same (unmodified) collection can now be referred to in query, index and admin operations using the new name.

This command does NOT actually rename the underlying Solr collection - it sets up a new one-to-one alias using the new name, or renames the existing alias so that it uses the new name, while still referring to the same underlying Solr collection. However, from the user’s point of view the collection can now be accessed using the new name, and the new name can be also referred to in other aliases.

The following limitations apply:

  • the existing name must be either a SolrCloud collection or a standard alias referring to a single collection. Aliases that refer to more than 1 collection are not supported.

  • the existing name must not be a Routed Alias.

  • the target name must not be an existing alias.

RENAME Command Parameters

name
Name of the existing SolrCloud collection or an alias that refers to exactly one collection and is not a Routed Alias.
target
Target name of the collection. This will be the new alias that refers to the underlying SolrCloud collection. The original name (or alias) of the collection will be replaced also in the existing aliases so that they also refer to the new name. Target name must not be an existing alias.

Examples using RENAME

Assuming there are two actual SolrCloud collections named collection1 and collection2, and the following aliases already exist:

  • col1 -> collection1: this resolves to collection1.

  • col2 -> collection2: this resolves to collection2.

  • simpleAlias -> col1: this resolves to collection1.

  • compoundAlias -> col1,col2: this resolves to collection1,collection2

The RENAME of col1 to foo will change the aliases to the following:

  • foo -> collection1: this resolves to collection1.

  • col2 -> collection2: this resolves to collection2.

  • simpleAlias -> foo: this resolves to collection1.

  • compoundAlias -> foo,col2: this resolves to collection1,collection2.

If we then rename collection1 (which is an actual collection name) to collection2 (which is also an actual collection name) the following aliases will exist now:

  • foo -> collection2: this resolves to collection2.

  • col2 -> collection2: this resolves to collection2.

  • simpleAlias -> foo: this resolves to collection2.

  • compoundAlias -> foo,col2: this would resolve now to collection2,collection2 so it’s reduced to simply collection2.

  • collection1 -> collection2: this newly created alias effectively hides collection1 from regular query and update commands, which are directed now to collection2.

DELETE: Delete a Collection

/admin/collections?action=DELETE&name=collection

DELETE Parameters

name
The name of the collection to delete. This parameter is required.
async
Request ID to track this action which will be processed asynchronously.

DELETE Response

The response will include the status of the request and the cores that were deleted. If the status is anything other than "success", an error message will explain why the request failed.

Examples using DELETE

Input

Delete the collection named "newCollection".

http://localhost:8983/solr/admin/collections?action=DELETE&name=newCollection&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">603</int>
  </lst>
  <lst name="success">
    <lst name="10.0.1.6:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">19</int>
      </lst>
    </lst>
    <lst name="10.0.1.4:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">67</int>
      </lst>
    </lst>
  </lst>
</response>

COLLECTIONPROP: Collection Properties

Add, edit or delete a collection property.

/admin/collections?action=COLLECTIONPROP&name=collectionName&propertyName=propertyName&propertyValue=propertyValue

COLLECTIONPROP Parameters

name
The name of the collection for which the property would be set.
propertyName
The name of the property.
propertyValue
The value of the property. When not provided, the property is deleted.

COLLECTIONPROP Response

The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.

Examples using COLLECTIONPROP

Input

http://localhost:8983/solr/admin/collections?action=COLLECTIONPROP&name=coll&propertyName=foo&propertyValue=bar&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">0</int>
  </lst>
</response>

MIGRATE: Migrate Documents to Another Collection

/admin/collections?action=MIGRATE&collection=name&split.key=key1!&target.collection=target_collection&forward.timeout=60

The MIGRATE command is used to migrate all documents having a given routing key to another collection. The source collection will continue to have the same data as-is but it will start re-routing write requests to the target collection for the number of seconds specified by the forward.timeout parameter. It is the responsibility of the user to switch to the target collection for reads and writes after the MIGRATE action completes.

The routing key specified by the split.key parameter may span multiple shards on both the source and the target collections. The migration is performed shard-by-shard in a single thread. One or more temporary collections may be created by this command during the ‘migrate’ process but they are cleaned up at the end automatically.

This is a long running operation and therefore using the async parameter is highly recommended. If the async parameter is not specified then the operation is synchronous by default and keeping a large read timeout on the invocation is advised. Even with a large read timeout, the request may still timeout but that doesn’t necessarily mean that the operation has failed. Users should check logs, cluster state, source and target collections before invoking the operation again.

This command works only with collections using the compositeId router. The target collection must not receive any writes during the time the MIGRATE command is running otherwise some writes may be lost.

Please note that the MIGRATE API does not perform any de-duplication on the documents so if the target collection contains documents with the same uniqueKey as the documents being migrated then the target collection will end up with duplicate documents.

MIGRATE Parameters

collection
The name of the source collection from which documents will be split. This parameter is required.
target.collection
The name of the target collection to which documents will be migrated. This parameter is required.
split.key
The routing key prefix. For example, if the uniqueKey of a document is "a!123", then you would use split.key=a!. This parameter is required.
forward.timeout
The timeout, in seconds, until which write requests made to the source collection for the given split.key will be forwarded to the target shard. The default is 60 seconds.
property.name=value
Set core property name to value. See the section Defining core.properties for details on supported properties and values.
async
Request ID to track this action which will be processed asynchronously.

MIGRATE Response

The response will include the status of the request.

Examples using MIGRATE

Input

http://localhost:8983/solr/admin/collections?action=MIGRATE&collection=test1&split.key=a!&target.collection=test2&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">19014</int>
  </lst>
  <lst name="success">
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1</int>
      </lst>
      <str name="core">test2_shard1_0_replica1</str>
      <str name="status">BUFFERING</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">2479</int>
      </lst>
      <str name="core">split_shard1_0_temp_shard1_0_shard1_replica1</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1002</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">21</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1655</int>
      </lst>
      <str name="core">split_shard1_0_temp_shard1_0_shard1_replica2</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">4006</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">17</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1</int>
      </lst>
      <str name="core">test2_shard1_0_replica1</str>
      <str name="status">EMPTY_BUFFER</str>
    </lst>
    <lst name="192.168.43.52:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">31</int>
      </lst>
    </lst>
    <lst name="192.168.43.52:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">31</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1</int>
      </lst>
      <str name="core">test2_shard1_1_replica1</str>
      <str name="status">BUFFERING</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1742</int>
      </lst>
      <str name="core">split_shard1_1_temp_shard1_1_shard1_replica1</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1002</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">15</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1917</int>
      </lst>
      <str name="core">split_shard1_1_temp_shard1_1_shard1_replica2</str>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">5007</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">8</int>
      </lst>
    </lst>
    <lst>
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">1</int>
      </lst>
      <str name="core">test2_shard1_1_replica1</str>
      <str name="status">EMPTY_BUFFER</str>
    </lst>
    <lst name="192.168.43.52:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">30</int>
      </lst>
    </lst>
    <lst name="192.168.43.52:8983_solr">
      <lst name="responseHeader">
        <int name="status">0</int>
        <int name="QTime">30</int>
      </lst>
    </lst>
  </lst>
</response>

REINDEXCOLLECTION: Re-Index a Collection

/admin/collections?action=REINDEXCOLLECTION&name=name

The REINDEXCOLLECTION command reindexes a collection using existing data from the source collection.

Reindexing is potentially a lossy operation - some of the existing indexed data that is not available as stored fields may be lost, so users should use this command with caution, evaluating the potential impact by using different source and target collection names first, and preserving the source collection until the evaluation is complete.

The target collection must not exist (and may not be an alias). If the target collection name is the same as the source collection then first a unique sequential name will be generated for the target collection, and then after reindexing is done an alias will be created that points from the source name to the actual sequentially-named target collection.

When reindexing is started the source collection is put in read-only mode to ensure that all source documents are properly processed.

Using optional parameters a different index schema, collection shape (number of shards and replicas) or routing parameters can be requested for the target collection.

Reindexing is executed as a streaming expression daemon, which runs on one of the source collection’s replicas. It is usually a time-consuming operation so it’s recommended to execute it as an asynchronous request in order to avoid request time outs. Only one reindexing operation may execute concurrently for a given source collection. Long-running, erroneous or crashed reindexing operations may be terminated by using the abort option, which also removes partial results.

REINDEXCOLLECTION Parameters

name
Source collection name, may be an alias. This parameter is required.
cmd
Optional command. Default command is start. Currently supported commands are:
  • start - default, starts processing if not already running,

  • abort - aborts an already running reindexing (or clears a left-over status after a crash), and deletes partial results,

  • status - returns detailed status of a running reindexing command.

target
Target collection name, optional. If not specified a unique name will be generated and after all documents have been copied an alias will be created that points from the source collection name to the unique sequentially-named collection, effectively "hiding" the original source collection from regular update and search operations.
q
Optional query to select documents for reindexing. Default value is *:*.
fl
Optional list of fields to reindex. Default value is *.
rows
Documents are transferred in batches. Depending on the average size of the document large batch sizes may cause memory issues. Default value is 100.
configName
collection.configName
Optional name of the configset for the target collection. Default is the same as the source collection.

There’s a number of optional parameters that determine the target collection layout. If they are not specified in the request then their values are copied from the source collection. The following parameters are currently supported (described in details in the CREATE collection section): numShards, replicationFactor, nrtReplicas, tlogReplicas, pullReplicas, maxShardsPerNode, autoAddReplicas, shards, policy, createNodeSet, createNodeSet.shuffle, router.*.

removeSource
Optional boolean. If true then after the processing is successfully finished the source collection will be deleted.
async
Optional request ID to track this action which will be processed asynchronously.

When the reindexing process has completed the target collection is marked using property.rx: "finished", and the source collection state is updated to become read-write. On any errors the command will delete any temporary and target collections and also reset the state of the source collection’s read-only flag.

Examples using REINDEXCOLLECTION

Input

http://localhost:8983/solr/admin/collections?action=REINDEXCOLLECTION&name=newCollection&numShards=3&configName=conf2&q=id:aa*&fl=id,string_s

This request specifies a different schema for the target collection, copies only some of the fields, selects only the documents matching a query, and also potentially re-shapes the collection by explicitly specifying 3 shards. Since the target collection hasn’t been specified in the parameters, a collection with a unique name, e.g., .rx_newCollection_2, will be created and on success an alias pointing from newCollection to .rx_newCollection_2 will be created, effectively replacing the source collection for the purpose of indexing and searching. The source collection is assumed to be small so a synchronous request was made.

Output

{
  "responseHeader":{
    "status":0,
    "QTime":10757},
  "reindexStatus":{
    "phase":"done",
    "inputDocs":13416,
    "processedDocs":376,
    "actualSourceCollection":".rx_newCollection_1",
    "state":"finished",
    "actualTargetCollection":".rx_newCollection_2",
    "checkpointCollection":".rx_ck_newCollection"
  }
}

As a result a new collection .rx_newCollection_2 has been created, with selected documents reindexed to 3 shards, and with an alias pointing from newCollection to this one. The status also shows that the source collection was already an alias to .rx_newCollection_1, which was likely a result of a previous reindexing.

COLSTATUS: Detailed Status of a Collection’s Indexes

The COLSTATUS command provides a detailed description of the collection status, including low-level index information about segments and field data.

This command also checks the compliance of Lucene index field types with the current Solr collection schema and indicates the names of non-compliant fields, i.e., Lucene fields with field types incompatible (or different) from the corresponding Solr field types declared in the current schema. Such incompatibilities may result from incompatible schema changes or after migration of data to a different major Solr release.

/admin/collections?action=COLSTATUS&collection=coll&coreInfo=true&segments=true&fieldInfo=true&sizeInfo=true

COLSTATUS Parameters

collection
Collection name (optional). If missing then it means all collections.
coreInfo
Optional boolean. If true then additional information will be provided about SolrCore of shard leaders.
segments
Optional boolean. If true then segment information will be provided.
fieldInfo
Optional boolean. If true then detailed Lucene field information will be provided and their corresponding Solr schema types.
sizeInfo
Optional boolean. If true then additional information about the index files size and their RAM usage will be provided.

Index Size Analysis Tool

The COLSTATUS command also provides a tool for analyzing and estimating the composition of raw index data. Please note that this tool should be used with care because it generates a significant IO load on all shard leaders of the analyzed collections. A sampling threshold and a sampling percent parameters can be adjusted to reduce this load to some degree.

Size estimates produced by this tool are only approximate and represent the aggregated size of uncompressed index data. In reality these values would never occur, because Lucene (and Solr) always stores data in a compressed format - still, these values help to understand what occupies most of the space and the relative size of each type of data and each field in the index.

In the following sections whenever "size" is mentioned it means an estimated aggregated size of uncompressed (raw) data.

The following parameters are specific to this tool:

rawSize
Optional boolean. If true then run the raw index data analysis tool (other boolean options below imply this option if any of them are true). Command response will include sections that show estimated breakdown of data size per field and per data type.
rawSizeSummary
Optional boolean. If true then include also a more detailed breakdown of data size per field and per type.
rawSizeDetails
Optional boolean. If true then provide exhaustive details that include statistical distribution of items per field and per type as well as top 20 largest items per field.
rawSizeSamplingPercent
Optional float. When the index is larger than a certain threshold (100k documents per shard) only a part of data is actually retrieved and analyzed in order to reduce the IO load, and then the final results are extrapolated. Values must be greater than 0 and less or equal to 100.0. Default value is 5.0. Very small values (between 0.0 and 1.0) may introduce significant estimation errors. Also, values that would result in less than 10 documents being sampled are rejected with an exception.

Response for this command always contains two sections:

  • fieldsBySize is a map where field names are keys and values are estimated sizes of raw (uncompressed) data that belongs to the field. The map is sorted by size so that it’s easy to see what field occupies most space.

  • typesBySize is a map where data types are the keys and values are estimates sizes of raw (uncompressed) data of particular type. This map is also sorted by size.

Optional sections include:

  • summary section containing a breakdown of data sizes for each field by data type.

  • details section containing detailed statistical summary of size distribution within each field, per data type. This section also shows topN values by size from each field.

Data types shown in the response can be roughly divided into the following groups:

  • storedFields - represents the raw uncompressed data in stored fields. For example, for UTF-8 strings this represents the aggregated sum of the number of bytes in the strings' UTF-8 representation, for long numbers this is 8 bytes per value, etc.

  • terms_terms - represents the aggregated size of the term dictionary. The size of this data is affected by the the number and length of unique terms, which in turn depends on the field size and the analysis chain.

  • terms_postings - represents the aggregated size of all term position and offset information, if present. This information may be absent if position-based searching, such as phrase queries, is not needed.

  • terms_payloads - represents the aggregated size of all per-term payload data, if present.

  • norms - represents the aggregated size of field norm information. This information may be omitted if a field has an omitNorms flag in the schema, which is common for fields that don’t need weighting or scoring by field length.

  • termVectors - represents the aggregated size of term vectors.

  • docValues_* - represents aggregated size of doc values, by type (e.g., docValues_numeric, docValues_binary, etc).

  • points - represents aggregated size of point values.

COLSTATUS Response

The response will include an overview of the collection status, the number of active or inactive shards and replicas, and additional index information of shard leaders.

Examples using COLSTATUS

Input

http://localhost:8983/solr/admin/collections?action=COLSTATUS&collection=gettingstarted&fieldInfo=true&sizeInfo=true

Output

{
    "responseHeader": {
        "status": 0,
        "QTime": 50
    },
    "gettingstarted": {
        "stateFormat": 2,
        "znodeVersion": 16,
        "properties": {
            "autoAddReplicas": "false",
            "maxShardsPerNode": "-1",
            "nrtReplicas": "2",
            "pullReplicas": "0",
            "replicationFactor": "2",
            "router": {
                "name": "compositeId"
            },
            "tlogReplicas": "0"
        },
        "activeShards": 2,
        "inactiveShards": 0,
        "schemaNonCompliant": [
            "(NONE)"
        ],
        "shards": {
            "shard1": {
                "state": "active",
                "range": "80000000-ffffffff",
                "replicas": {
                    "total": 2,
                    "active": 2,
                    "down": 0,
                    "recovering": 0,
                    "recovery_failed": 0
                },
                "leader": {
                    "coreNode": "core_node4",
                    "core": "gettingstarted_shard1_replica_n1",
                    "base_url": "http://192.168.0.80:8983/solr",
                    "node_name": "192.168.0.80:8983_solr",
                    "state": "active",
                    "type": "NRT",
                    "force_set_state": "false",
                    "leader": "true",
                    "segInfos": {
                        "info": {
                            "minSegmentLuceneVersion": "9.0.0",
                            "commitLuceneVersion": "9.0.0",
                            "numSegments": 40,
                            "segmentsFileName": "segments_w",
                            "totalMaxDoc": 686953,
                            "userData": {
                                "commitCommandVer": "1627350608019193856",
                                "commitTimeMSec": "1551962478819"
                            }
                        },
                        "fieldInfoLegend": [
                            "I - Indexed",
                            "D - DocValues",
                            "xxx - DocValues type",
                            "V - TermVector Stored",
                            "O - Omit Norms",
                            "F - Omit Term Frequencies & Positions",
                            "P - Omit Positions",
                            "H - Store Offsets with Positions",
                            "p - field has payloads",
                            "s - field uses soft deletes",
                            ":x:x:x - point data dim : index dim : num bytes"
                        ],
                        "segments": {
                            "_i": {
                                "name": "_i",
                                "delCount": 738,
                                "softDelCount": 0,
                                "hasFieldUpdates": false,
                                "sizeInBytes": 109398213,
                                "size": 70958,
                                "age": "2019-03-07T12:34:24.761Z",
                                "source": "merge",
                                "version": "9.0.0",
                                "createdVersionMajor": 9,
                                "minVersion": "9.0.0",
                                "diagnostics": {
                                    "os": "Mac OS X",
                                    "java.vendor": "Oracle Corporation",
                                    "java.version": "1.8.0_191",
                                    "java.vm.version": "25.191-b12",
                                    "lucene.version": "9.0.0",
                                    "mergeMaxNumSegments": "-1",
                                    "os.arch": "x86_64",
                                    "java.runtime.version": "1.8.0_191-b12",
                                    "source": "merge",
                                    "mergeFactor": "10",
                                    "os.version": "10.14.3",
                                    "timestamp": "1551962064761"
                                },
                                "attributes": {
                                    "Lucene50StoredFieldsFormat.mode": "BEST_SPEED"
                                },
                                "largestFiles": {
                                    "_i.fdt": "42.5 MB",
                                    "_i_Lucene80_0.dvd": "35.3 MB",
                                    "_i_Lucene50_0.pos": "11.1 MB",
                                    "_i_Lucene50_0.doc": "10 MB",
                                    "_i_Lucene50_0.tim": "4.3 MB"
                                },
                                "ramBytesUsed": {
                                    "total": 49153,
                                    "postings [PerFieldPostings(segment=_i formats=1)]": {
                                        "total": 31023,
                                "fields": {
                                    "dc": {
                                        "flags": "I-----------",
                                        "schemaType": "text_general"
                                    },
                                    "dc_str": {
                                        "flags": "-Dsrs-------",
                                        "schemaType": "strings"
                                    },
                                    "dc.title": {
                                        "flags": "I-----------",
                                        "docCount": 70958,
                                        "sumDocFreq": 646756,
                                        "sumTotalTermFreq": 671817,
                                        "schemaType": "text_general"
                                    },
                                    "dc.date": {
                                        "flags": "-Dsrn-------:1:1:8",
                                        "schemaType": "pdates"
                                    }
                                  }}}}}}}}}}}

Example of using the raw index data analysis tool:

Input

http://localhost:8983/solr/admin/collections?action=COLSTATUS&collection=gettingstarted&rawSize=true&rawSizeSamplingPercent=0.1

Output

{
    "responseHeader": {
        "status": 0,
        "QTime": 26812
    },
    "gettingstarted": {
        "stateFormat": 2,
        "znodeVersion": 33,
        "properties": {
            "autoAddReplicas": "false",
            "maxShardsPerNode": "-1",
            "nrtReplicas": "2",
            "pullReplicas": "0",
            "replicationFactor": "2",
            "router": {
                "name": "compositeId"
            },
            "tlogReplicas": "0"
        },
        "activeShards": 2,
        "inactiveShards": 0,
        "schemaNonCompliant": [
            "(NONE)"
        ],
        "shards": {
            "shard1": {
                "state": "active",
                "range": "80000000-ffffffff",
                "replicas": {
                    "total": 2,
                    "active": 2,
                    "down": 0,
                    "recovering": 0,
                    "recovery_failed": 0
                },
                "leader": {
                    "coreNode": "core_node5",
                    "core": "gettingstarted_shard1_replica_n2",
                    "base_url": "http://192.168.0.80:8983/solr",
                    "node_name": "192.168.0.80:8983_solr",
                    "state": "active",
                    "type": "NRT",
                    "force_set_state": "false",
                    "leader": "true",
                    "segInfos": {
                        "info": {
                            "minSegmentLuceneVersion": "9.0.0",
                            "commitLuceneVersion": "9.0.0",
                            "numSegments": 46,
                            "segmentsFileName": "segments_4h",
                            "totalMaxDoc": 3283741,
                            "userData": {
                                "commitCommandVer": "1635676266902323200",
                                "commitTimeMSec": "1559902446318"
                            }
                        },
                        "rawSize": {
                            "fieldsBySize": {
                                "revision.text": "7.9 GB",
                                "revision.text_str": "734.7 MB",
                                "revision.comment_str": "259.1 MB",
                                "revision": "239.2 MB",
                                "revision.sha1": "211.9 MB",
                                "revision.comment": "201.3 MB",
                                "title": "114.9 MB",
                                "revision.contributor": "103.5 MB",
                                "revision.sha1_str": "96.4 MB",
                                "revision.id": "75.2 MB",
                                "ns": "75.2 MB",
                                "revision.timestamp": "75.2 MB",
                                "revision.contributor.id": "74.7 MB",
                                "revision.format": "69 MB",
                                "id": "65 MB",
                                "title_str": "26.8 MB",
                                "revision.model_str": "25.4 MB",
                                "_version_": "24.9 MB",
                                "_root_": "24.7 MB",
                                "revision.contributor.ip_str": "22 MB",
                                "revision.contributor_str": "21.8 MB",
                                "revision_str": "15.5 MB",
                                "revision.contributor.ip": "13.5 MB",
                                "restrictions_str": "428.7 KB",
                                "restrictions": "164.2 KB",
                                "name_str": "84 KB",
                                "includes_str": "8.8 KB"
                            },
                            "typesBySize": {
                                "storedFields": "7.8 GB",
                                "docValues_sortedSet": "1.2 GB",
                                "terms_postings": "788.8 MB",
                                "terms_terms": "342.2 MB",
                                "norms": "237 MB",
                                "docValues_sortedNumeric": "124.3 MB",
                                "points": "115.7 MB",
                                "docValues_numeric": "24.9 MB",
                                "docValues_sorted": "18.5 MB"
                            }
                        }
                    }
                }
            },
            "shard2": {
                "state": "active",
                "range": "0-7fffffff",
                "replicas": {
                    "total": 2,
                    "active": 2,
                    "down": 0,
                    "recovering": 0,
                    "recovery_failed": 0
                },
                "leader": {
                    "coreNode": "core_node8",
                    "core": "gettingstarted_shard2_replica_n6",
                    "base_url": "http://192.168.0.80:8983/solr",
                    "node_name": "192.168.0.80:8983_solr",
                    "state": "active",
                    "type": "NRT",
                    "force_set_state": "false",
                    "leader": "true",
                    "segInfos": {
                        "info": {
                            "minSegmentLuceneVersion": "9.0.0",
                            "commitLuceneVersion": "9.0.0",
                            "numSegments": 55,
                            "segmentsFileName": "segments_4d",
                            "totalMaxDoc": 3284863,
                            "userData": {
                                "commitCommandVer": "1635676259742646272",
                                "commitTimeMSec": "1559902445005"
                            }
                        },
                        "rawSize": {
                            "fieldsBySize": {
                                "revision.text": "8.3 GB",
                                "revision.text_str": "687.5 MB",
                                "revision": "238.9 MB",
                                "revision.sha1": "212 MB",
                                "revision.comment_str": "211.5 MB",
                                "revision.comment": "201.7 MB",
                                "title": "115.9 MB",
                                "revision.contributor": "103.4 MB",
                                "revision.sha1_str": "96.3 MB",
                                "ns": "75.2 MB",
                                "revision.id": "75.2 MB",
                                "revision.timestamp": "75.2 MB",
                                "revision.contributor.id": "74.6 MB",
                                "revision.format": "69 MB",
                                "id": "67 MB",
                                "title_str": "29.5 MB",
                                "_version_": "24.8 MB",
                                "revision.model_str": "24 MB",
                                "revision.contributor_str": "21.7 MB",
                                "revision.contributor.ip_str": "20.9 MB",
                                "revision_str": "15.5 MB",
                                "revision.contributor.ip": "13.8 MB",
                                "restrictions_str": "411.1 KB",
                                "restrictions": "132.9 KB",
                                "name_str": "42 KB",
                                "includes_str": "41 KB"
                            },
                            "typesBySize": {
                                "storedFields": "8.2 GB",
                                "docValues_sortedSet": "1.1 GB",
                                "terms_postings": "787.4 MB",
                                "terms_terms": "337.5 MB",
                                "norms": "236.6 MB",
                                "docValues_sortedNumeric": "124.1 MB",
                                "points": "115.7 MB",
                                "docValues_numeric": "24.9 MB",
                                "docValues_sorted": "20.5 MB"
                            }
                        }
                    }
                }
            }
        }
    }
}

BACKUP: Backup Collection

Backs up Solr collections and associated configurations to a shared filesystem - for example a Network File System.

/admin/collections?action=BACKUP&name=myBackupName&collection=myCollectionName&location=/path/to/my/shared/drive

The BACKUP command will backup Solr indexes and configurations for a specified collection. The BACKUP command takes one copy from each shard for the indexes. For configurations, it backs up the configset that was associated with the collection and metadata.

BACKUP Parameters

collection
The name of the collection to be backed up. This parameter is required.
name
What to name the backup that is created. This is checked to make sure it doesn’t already exist, and otherwise an error message is raised. This parameter is required.
location

The location on a shared drive for the backup command to write to. Alternately it can be set as a cluster property.

If the location path is on a mounted drive, the mount must be available on the node that serves as the overseer, even if the overseer node does not host a replica of the collection being backed up. Since any node can take the overseer role at any time, a best practice to avoid possible backup failures is to ensure the mount point is available on all nodes of the cluster.

async
Request ID to track this action which will be processed asynchronously.
repository
The name of a repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.

RESTORE: Restore Collection

Restores Solr indexes and associated configurations.

/admin/collections?action=RESTORE&name=myBackupName&location=/path/to/my/shared/drive&collection=myRestoredCollectionName

The RESTORE operation will create a collection with the specified name in the collection parameter. You cannot restore into the same collection the backup was taken from. Also the target collection should not be present at the time the API is called as Solr will create it for you.

The collection created will be have the same number of shards and replicas as the original collection, preserving routing information, etc. Optionally, you can override some parameters documented below.

While restoring, if a configset with the same name exists in ZooKeeper then Solr will reuse that, or else it will upload the backed up configset in ZooKeeper and use that.

You can use the collection CREATEALIAS command to make sure clients don’t need to change the endpoint to query or index against the newly restored collection.

RESTORE Parameters

collection
The collection where the indexes will be restored into. This parameter is required.
name
The name of the existing backup that you want to restore. This parameter is required.
location
The location on a shared drive for the RESTORE command to read from. Alternately it can be set as a cluster property.
async
Request ID to track this action which will be processed asynchronously.
repository
The name of a repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.

There are also optional parameters that determine the target collection layout. The following parameters are currently supported (described in detail in the CREATE collection section): createNodeSet, createNodeSet.shuffle.

Note: for createNodeSet the special value of EMPTY is not allowed with this command.

Overridable Parameters

Additionally, there are several parameters that may have been set on the original collection that can be overridden when restoring the backup (described in detail in the CREATE collection section): collection.configName, replicationFactor, nrtReplicas, tlogReplicas, pullReplicas, property.name=value.

REBALANCELEADERS: Rebalance Leaders

Reassigns leaders in a collection according to the preferredLeader property across active nodes.

/admin/collections?action=REBALANCELEADERS&collection=collectionName

Leaders are assigned in a collection according to the preferredLeader property on active nodes. This command should be run after the preferredLeader property has been assigned via the BALANCESHARDUNIQUE or ADDREPLICAPROP commands.

It is not required that all shards in a collection have a preferredLeader property. Rebalancing will only attempt to reassign leadership to those replicas that have the preferredLeader property set to true and are not currently the shard leader and are currently active.

REBALANCELEADERS Parameters

collection
The name of the collection to rebalance preferredLeaders on. This parameter is required.
maxAtOnce

The maximum number of reassignments to have queue up at once. Values <=0 are use the default value Integer.MAX_VALUE.

When this number is reached, the process waits for one or more leaders to be successfully assigned before adding more to the queue.

maxWaitSeconds

Defaults to 60. This is the timeout value when waiting for leaders to be reassigned. If maxAtOnce is less than the number of reassignments that will take place, this is the maximum interval that any single wait for at least one reassignment.

For example, if 10 reassignments are to take place and maxAtOnce is 1 and maxWaitSeconds is 60, the upper bound on the time that the command may wait is 10 minutes.

REBALANCELEADERS Response

The response will include the status of the request. A status of "0" indicates the request was processed, not that all assignments were successful. Examine the "Summary" section for that information.

Examples using REBALANCELEADERS

Input

Either of these commands would cause all the active replicas that had the preferredLeader property set and were not already the preferred leader to become leaders.

http://localhost:8983/solr/admin/collections?action=REBALANCELEADERS&collection=collection1&wt=json

http://localhost:8983/solr/admin/collections?action=REBALANCELEADERS&collection=collection1&maxAtOnce=5&maxWaitSeconds=30&wt=json

Output

In this example:

  • In the "alreadyLeaders" section, core_node5 was already the leader, so there were no changes in leadership for shard1.

  • In the "inactivePreferreds" section, core_node57 had the preferredLeader property set, but the node was not active, the leader for shard7 was not changed. This is considered successful.

  • In the "successes" section, core_node23 was not the leader for shard3, so leadership was assigned to that replica.

The "Summary" section with the "Success" tag indicates that the command rebalanced all active replicas with the preferredLeader property set as requried. If a replica cannot be made leader due to not being healthy (for example, it is on a Solr instance that is not running), it’s also considered success.

{
  "responseHeader":{
    "status":0,
    "QTime":3054},
  "Summary":{
    "Success":"All active replicas with the preferredLeader property set are leaders"},
  "alreadyLeaders":{
    "core_node5":{
      "status":"skipped",
      "msg":"Replica core_node5 is already the leader for shard shard1. No change necessary"}},
  "inactivePreferreds":{
    "core_node57":{
      "status":"skipped",
      "msg":"Replica core_node57 is a referredLeader for shard shard7, but is inactive. No change necessary"}},
  "successes":{
    "shard3":{
      "status":"success",
      "msg":"Successfully changed leader of slice shard3 to core_node23"}}}

Examining the clusterstate after issuing this call should show that every active replica that has the preferredLeader property should also have the "leader" property set to true.

The added work done by an NRT leader is quite small and only present when indexing. The primary use-case is to redistribute the leader role if there are a large number of leaders concentrated on a small number of nodes. Rebalancing will likely not improve performance unless the imbalance of leadership roles is measured in multiples of 10.
The BALANCESHARDUNIQUE command that distributes the preferredLeader property does not guarantee perfect distribution and in some collection topologies it is impossible to make that guarantee.