Cluster and Node Managment Commands

A cluster is a set of Solr nodes operating in coordination with each other.

These API commands work with a SolrCloud cluster at the entire cluster level, or on individual nodes.

CLUSTERSTATUS: Cluster Status

Fetch the cluster status including collections, shards, replicas, configuration name as well as collection aliases and cluster properties.

/admin/collections?action=CLUSTERSTATUS

CLUSTERSTATUS Parameters

collection
The collection or alias name for which information is requested. If omitted, information on all collections in the cluster will be returned. If an alias is supplied, information on the collections in the alias will be returned.
shard
The shard(s) for which information is requested. Multiple shard names can be specified as a comma-separated list.
_route_
This can be used if you need the details of the shard where a particular document belongs to and you don’t know which shard it falls under.

CLUSTERSTATUS Response

The response will include the status of the request and the status of the cluster.

Examples using CLUSTERSTATUS

Input

http://localhost:8983/solr/admin/collections?action=CLUSTERSTATUS

Output

{
  "responseHeader":{
    "status":0,
    "QTime":333},
  "cluster":{
    "collections":{
      "collection1":{
        "shards":{
          "shard1":{
            "range":"80000000-ffffffff",
            "state":"active",
            "replicas":{
              "core_node1":{
                "state":"active",
                "core":"collection1",
                "node_name":"127.0.1.1:8983_solr",
                "base_url":"http://127.0.1.1:8983/solr",
                "leader":"true"},
              "core_node3":{
                "state":"active",
                "core":"collection1",
                "node_name":"127.0.1.1:8900_solr",
                "base_url":"http://127.0.1.1:8900/solr"}}},
          "shard2":{
            "range":"0-7fffffff",
            "state":"active",
            "replicas":{
              "core_node2":{
                "state":"active",
                "core":"collection1",
                "node_name":"127.0.1.1:7574_solr",
                "base_url":"http://127.0.1.1:7574/solr",
                "leader":"true"},
              "core_node4":{
                "state":"active",
                "core":"collection1",
                "node_name":"127.0.1.1:7500_solr",
                "base_url":"http://127.0.1.1:7500/solr"}}}},
        "maxShardsPerNode":"1",
        "router":{"name":"compositeId"},
        "replicationFactor":"1",
        "znodeVersion": 11,
        "autoCreated":"true",
        "configName" : "my_config",
        "aliases":["both_collections"]
      },
      "collection2":{
        "..."
      }
    },
    "aliases":{ "both_collections":"collection1,collection2" },
    "roles":{
      "overseer":[
        "127.0.1.1:8983_solr",
        "127.0.1.1:7574_solr"]
    },
    "live_nodes":[
      "127.0.1.1:7574_solr",
      "127.0.1.1:7500_solr",
      "127.0.1.1:8983_solr",
      "127.0.1.1:8900_solr"]
  }
}

CLUSTERPROP: Cluster Properties

Add, edit or delete a cluster-wide property.

/admin/collections?action=CLUSTERPROP&name=propertyName&val=propertyValue

CLUSTERPROP Parameters

name
The name of the property. Supported properties names are autoAddReplicas, legacyCloud, location, maxCoresPerNode and urlScheme. Other properties can be set (for example, if you need them for custom plugins) but they must begin with the prefix ext.. Unknown properties that don’t begin with ext. will be rejected.
val
The value of the property. If the value is empty or null, the property is unset.

CLUSTERPROP Response

The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.

Examples using CLUSTERPROP

Input

http://localhost:8983/solr/admin/collections?action=CLUSTERPROP&name=urlScheme&val=https&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">0</int>
  </lst>
</response>

Setting Cluster-Wide Defaults

It is possible to set cluster-wide default values for certain attributes of a collection, using the defaults parameter.

Set/update default values

curl -X POST -H 'Content-type:application/json' --data-binary '
{
  "set-obj-property": {
    "defaults" : {
      "collection": {
        "numShards": 2,
        "nrtReplicas": 1,
        "tlogReplicas": 1,
        "pullReplicas": 1
      }
    }
  }
}' http://localhost:8983/api/cluster

Unset the only value of nrtReplicas

curl -X POST -H 'Content-type:application/json' --data-binary '
{
  "set-obj-property": {
    "defaults" : {
      "collection": {
        "nrtReplicas": null
      }
    }
  }
}' http://localhost:8983/api/cluster

Unset all values in defaults

curl -X POST -H 'Content-type:application/json' --data-binary '
{ "set-obj-property" : {
    "defaults" : null
}' http://localhost:8983/api/cluster
Until Solr 7.5, cluster properties supported a collectionDefaults key which is now deprecated and replaced with defaults. Using the collectionDefaults parameter in Solr 7.4 or 7.5 will continue to work but the format of the properties will automatically be converted to the new nested structure. Support for the "collectionDefaults" key will be removed in Solr 9.

BALANCESHARDUNIQUE: Balance a Property Across Nodes

/admin/collections?action=BALANCESHARDUNIQUE&collection=collectionName&property=propertyName

Insures that a particular property is distributed evenly amongst the physical nodes that make up a collection. If the property already exists on a replica, every effort is made to leave it there. If the property is not on any replica on a shard, one is chosen and the property is added.

BALANCESHARDUNIQUE Parameters

collection
The name of the collection to balance the property in. This parameter is required.
property
The property to balance. The literal property. is prepended to this property if not specified explicitly. This parameter is required.
onlyactivenodes
Defaults to true. Normally, the property is instantiated on active nodes only. If this parameter is specified as false, then inactive nodes are also included for distribution.
shardUnique
Something of a safety valve. There is one pre-defined property (preferredLeader) that defaults this value to true. For all other properties that are balanced, this must be set to true or an error message will be returned.

BALANCESHARDUNIQUE Response

The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.

Examples using BALANCESHARDUNIQUE

Input

Either of these commands would put the "preferredLeader" property on one replica in every shard in the "collection1" collection.

http://localhost:8983/solr/admin/collections?action=BALANCESHARDUNIQUE&collection=collection1&property=preferredLeader&wt=xml

http://localhost:8983/solr/admin/collections?action=BALANCESHARDUNIQUE&collection=collection1&property=property.preferredLeader&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">9</int>
  </lst>
</response>

Examining the clusterstate after issuing this call should show exactly one replica in each shard that has this property.

UTILIZENODE: Utilize a New Node

This command can be used to move some replicas from the existing nodes to either a new node or a less loaded node to reduce the load on the existing node.

This uses your autoscaling policies and preferences to identify which replica needs to be moved. It tries to fix any policy violations first and then it tries to move some load off of the most loaded nodes according to the preferences.

/admin/collections?action=UTILIZENODE&node=nodeName

UTILIZENODE Parameters

node
The name of the node that needs to be utilized. This parameter is required.

REPLACENODE: Move All Replicas in a Node to Another

This command recreates replicas in one node (the source) to another node(s) (the target). After each replica is copied, the replicas in the source node are deleted.

For source replicas that are also shard leaders the operation will wait for the number of seconds set with the timeout parameter to make sure there’s an active replica that can become a leader (either an existing replica becoming a leader or the new replica completing recovery and becoming a leader).

The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replicas but only when an Autoscaling policy is configured. Refer to Autoscaling Policy and Preferences section for more details.

/admin/collections?action=REPLACENODE&sourceNode=source-node&targetNode=target-node

REPLACENODE Parameters

sourceNode
The source node from which the replicas need to be copied from. This parameter is required.
targetNode
The target node where replicas will be copied. If this parameter is not provided, Solr will identify nodes automatically based on policies or number of cores in each node.
parallel
If this flag is set to true, all replicas are created in separate threads. Keep in mind that this can lead to very high network and disk I/O if the replicas have very large indices. The default is false.
async
Request ID to track this action which will be processed asynchronously.
timeout
Time in seconds to wait until new replicas are created, and until leader replicas are fully recovered. The default is 300, or 5 minutes.

This operation does not hold necessary locks on the replicas that belong to on the source node. So don’t perform other collection operations in this period.

DELETENODE: Delete Replicas in a Node

Deletes all replicas of all collections in that node. Please note that the node itself will remain as a live node after this operation.

/admin/collections?action=DELETENODE&node=nodeName

DELETENODE Parameters

node
The node to be removed. This parameter is required.
async
Request ID to track this action which will be processed asynchronously.

ADDROLE: Add a Role

/admin/collections?action=ADDROLE&role=roleName&node=nodeName

Assigns a role to a given node in the cluster. The only supported role is overseer.

Use this command to dedicate a particular node as Overseer. Invoke it multiple times to add more nodes. This is useful in large clusters where an Overseer is likely to get overloaded. If available, one among the list of nodes which are assigned the 'overseer' role would become the overseer. The system would assign the role to any other node if none of the designated nodes are up and running.

ADDROLE Parameters

role
The name of the role. The only supported role as of now is overseer. This parameter is required.
node
The name of the node that will be assigned the role. It is possible to assign a role even before that node is started. This parameter is started.

ADDROLE Response

The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.

Examples using ADDROLE

Input

http://localhost:8983/solr/admin/collections?action=ADDROLE&role=overseer&node=192.167.1.2:8983_solr&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">0</int>
  </lst>
</response>

REMOVEROLE: Remove Role

Remove an assigned role. This API is used to undo the roles assigned using ADDROLE operation

/admin/collections?action=REMOVEROLE&role=roleName&node=nodeName

REMOVEROLE Parameters

role
The name of the role. The only supported role as of now is overseer. This parameter is required.
node
The name of the node where the role should be removed.

REMOVEROLE Response

The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.

Examples using REMOVEROLE

Input

http://localhost:8983/solr/admin/collections?action=REMOVEROLE&role=overseer&node=192.167.1.2:8983_solr&wt=xml

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">0</int>
  </lst>
</response>

OVERSEERSTATUS: Overseer Status and Statistics

Returns the current status of the overseer, performance statistics of various overseer APIs, and the last 10 failures per operation type.

/admin/collections?action=OVERSEERSTATUS

Examples using OVERSEERSTATUS

Input:

http://localhost:8983/solr/admin/collections?action=OVERSEERSTATUS
{
  "responseHeader":{
    "status":0,
    "QTime":33},
  "leader":"127.0.1.1:8983_solr",
  "overseer_queue_size":0,
  "overseer_work_queue_size":0,
  "overseer_collection_queue_size":2,
  "overseer_operations":[
    "createcollection",{
      "requests":2,
      "errors":0,
      "avgRequestsPerSecond":0.7467088842794136,
      "5minRateRequestsPerSecond":7.525069023276674,
      "15minRateRequestsPerSecond":10.271274280947182,
      "avgTimePerRequest":0.5050685,
      "medianRequestTime":0.5050685,
      "75thPcRequestTime":0.519016,
      "95thPcRequestTime":0.519016,
      "99thPcRequestTime":0.519016,
      "999thPcRequestTime":0.519016},
    "removeshard",{
      "..."
  }],
  "collection_operations":[
    "splitshard",{
      "requests":1,
      "errors":1,
      "recent_failures":[{
          "request":{
            "operation":"splitshard",
            "shard":"shard2",
            "collection":"example1"},
          "response":[
            "Operation splitshard caused exception:","org.apache.solr.common.SolrException:org.apache.solr.common.SolrException: No shard with the specified name exists: shard2",
            "exception",{
              "msg":"No shard with the specified name exists: shard2",
              "rspCode":400}]}],
      "avgRequestsPerSecond":0.8198143044809885,
      "5minRateRequestsPerSecond":8.043840552427673,
      "15minRateRequestsPerSecond":10.502079828515368,
      "avgTimePerRequest":2952.7164175,
      "medianRequestTime":2952.7164175000003,
      "75thPcRequestTime":5904.384052,
      "95thPcRequestTime":5904.384052,
      "99thPcRequestTime":5904.384052,
      "999thPcRequestTime":5904.384052},
    "..."
  ],
  "overseer_queue":[
    "..."
  ],
  "..."
 }

MIGRATESTATEFORMAT: Migrate Cluster State

A expert level utility API to move a collection from shared clusterstate.json ZooKeeper node (created with stateFormat=1, the default in all Solr releases prior to 5.0) to the per-collection state.json stored in ZooKeeper (created with stateFormat=2, the current default) seamlessly without any application down-time.

/admin/collections?action=MIGRATESTATEFORMAT&collection=<collection_name>

MIGRATESTATEFORMAT Parameters

collection
The name of the collection to be migrated from clusterstate.json to its own state.json ZooKeeper node. This parameter is required.
async
Request ID to track this action which will be processed asynchronously.

This API is useful in migrating any collections created prior to Solr 5.0 to the more scalable cluster state format now used by default. If a collection was created in any Solr 5.x version or higher, then executing this command is not necessary.