Stream Evaluator Reference

Stream evaluators are different then stream sources or stream decorators. Both stream sources and stream decorators return streams of tuples. Stream evaluators are more like a traditional function that evaluates its parameters and returns an result. That result can be a single value, array, map or other structure.

Stream evaluators can be nested so that the output of an evaluator becomes the input for another evaluator.

Stream evaluators can be called in different contexts. For example a stream evaluator can be called on its own or it can be called within the context of a streaming expression.

abs

The abs function will return the absolute value of the provided single parameter. The abs function will fail to execute if the value is non-numeric. If a null value is found then null will be returned as the result.

abs Parameters

  • Field Name | Raw Number | Number Evaluator

abs Syntax

The expressions below show the various ways in which you can use the abs evaluator. Only one parameter is accepted. Returns a numeric value.

abs(1) // 1, not really a good use case for it
abs(-1) // 1, not really a good use case for it
abs(add(fieldA,fieldB)) // absolute value of fieldA + fieldB
abs(fieldA) // absolute value of fieldA

acos

The acos function returns the trigonometric arccosine of a number.

acos Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the arccosine of.

acos Syntax

acos(100.4)  // returns the arccosine of 100.4
acos(fieldA) // returns the arccosine for fieldA.
if(gt(fieldA,fieldB),sin(fieldA),sin(fieldB)) // if fieldA > fieldB then return the arccosine of fieldA, else return the arccosine of fieldB

add

The add function will take 2 or more numeric values and add them together. The add function will fail to execute if any of the values are non-numeric. If a null value is found then null will be returned as the result.

add Parameters

  • Field Name | Raw Number | Number Evaluator

  • Field Name | Raw Number | Number Evaluator

  • …​…​

  • Field Name | Raw Number | Number Evaluator

add Syntax

The expressions below show the various ways in which you can use the add evaluator. The number and order of these parameters do not matter and is not limited except that at least two parameters are required. Returns a numeric value.

add(1,2,3,4) // 1 + 2 + 3 + 4 == 10
add(1,fieldA) // 1 + value of fieldA
add(fieldA,1.4) // value of fieldA + 1.4
add(fieldA,fieldB,fieldC) // value of fieldA + value of fieldB + value of fieldC
add(fieldA,div(fieldA,fieldB)) // value of fieldA + (value of fieldA / value of fieldB)
add(fieldA,if(gt(fieldA,fieldB),fieldA,fieldB)) // if fieldA > fieldB then fieldA + fieldA, else fieldA + fieldB

analyze

The analyze function analyzes text using a Lucene/Solr analyzer and returns a list of tokens emitted by the analyzer. The analyze function can be called on its own or within the select and cartesianProduct streaming expressions.

analyze Parameters

  • Field Name | Raw Text: Either the field in a tuple or the raw text to be analyzed.

  • Analyzer Field Name: The field name of the analyzer to use to analyze the text.

analyze Syntax

The expressions below show the various ways in which you can use the analyze evaluator.

  • Analyze the raw text: analyze("hello world", analyzerField)

  • Analyze a text field within a select expression. This will annotate tuples with the output of the analyzer: select(expr, analyze(textField, analyzerField) as outField)

  • Analyze a text field with a cartesianProduct expression. This will stream each token emitted by the analyzer in its own tuple: cartesianProduct(expr, analyze(textField, analyzer) as outField)

and

The and function will return the logical AND of at least 2 boolean parameters. The function will fail to execute if any parameters are non-boolean or null. Returns a boolean value.

and Parameters

  • Field Name | Raw Boolean | Boolean Evaluator

  • Field Name | Raw Boolean | Boolean Evaluator

  • …​…​

  • Field Name | Raw Boolean | Boolean Evaluator

and Syntax

The expressions below show the various ways in which you can use the and evaluator. At least two parameters are required, but there is no limit to how many you can use.

and(true,fieldA) // true && fieldA
and(fieldA,fieldB) // fieldA && fieldB
and(or(fieldA,fieldB),fieldC) // (fieldA || fieldB) && fieldC
and(fieldA,fieldB,fieldC,or(fieldD,fieldE),fieldF)

anova

The anova function calculates the analysis of variance for two or more numeric arrays.

anova Parameters

  • numeric array …​ (two or more)

anova Syntax

anova(numericArray1, numericArray2) // calculates ANOVA for two numeric arrays
anova(numericArray1, numericArray2, numericArray2) // calculates ANOVA for three numeric arrays

array

The array function returns an array of numerics or other objects including other arrays.

array Parameters

  • numeric | array …​

array Syntax

array(1, 2, 3)  // Array of numerics
array(array(1,2,3), array(4,5,6)) // Array of arrays

asin

The asin function returns the trigonometric arcsine of a number.

asin Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the arcsine of.

asin Syntax

asin(100.4)  // returns the sine of 100.4
asine(fieldA) // returns the sine for fieldA.
if(gt(fieldA,fieldB),asin(fieldA),asin(fieldB)) // if fieldA > fieldB then return the asine of fieldA, else return the asine of fieldB

atan

The atan function returns the trigonometric arctangent of a number.

atan Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the arctangent of.

atan Syntax

atan(100.4)  // returns the arctangent of 100.4
atan(fieldA) // returns the arctangent for fieldA.
if(gt(fieldA,fieldB),atan(fieldA),atan(fieldB)) // if fieldA > fieldB then return the arctanget of fieldA, else return the arctangent of fieldB

betaDistribution

The betaDistribution function returns a beta probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, kolmogorovSmirnov and cumulativeProbability functions.

betaDistribution Parameters

  • double: shape1

  • double: shape2

betaDistribution Returns

A probability distribution function.

betaDistribution Syntax

betaDistribution(1, 5)

binomialCoefficient

The binomialCoefficient function returns a Binomial Coefficient, the number of k-element subsets that can be selected from an n-element set.

binomialCoefficient Parameters

  • integer: [n] set

  • integer: [k] subset

binomialCoefficient Returns

A long value: The number of k-element subsets that can be selected from an n-element set.

binomialCoefficient Syntax

binomialCoefficient(8, 3) // Returns the number of 3 element subsets from an 8 element set.

binomialDistribution

The binomialDistribution function returns a binomial probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

binomialDistribution Parameters

  • integer: number of trials

  • double: probability of success

binomialDistribution Returns

A probability distribution function.

binomialDistribution Syntax

binomialDistribution(1000, .5)

cbrt

The cbrt function returns the trigonometric cube root of a number.

cbrt Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the cube root of.

cbrt Syntax

cbrt(100.4)  // returns the square root of 100.4
cbrt(fieldA) // returns the square root for fieldA.
if(gt(fieldA,fieldB),cbrt(fieldA),cbrt(fieldB)) // if fieldA > fieldB then return the cbrt of fieldA, else return the cbrt of fieldB

ceil

The ceil function rounds a decimal value to the next highest whole number.

ceil Parameters

  • Field Name | Raw Number | Number Evaluator: The decimal to round up.

ceil Syntax

The expressions below show the various ways in which you can use the ceil evaluator.

ceil(100.4) // returns 101.
ceil(fieldA) // returns the next highest whole number for fieldA.
if(gt(fieldA,fieldB),ceil(fieldA),ceil(fieldB)) // if fieldA > fieldB then return the ceil of fieldA, else return the ceil of fieldB.

col

The col function returns a numeric array from a list of Tuples. The col function is used to create numeric arrays from stream sources.

col Parameters

  • list of Tuples

  • field name: The field to create the array from.

col Syntax

col(tupleList, fieldName)

constantDistribution

The constantDistribution function returns a constant probability distribution based on its parameter. This function is part of the probability distribution framework and is designed to work with the sample and cumulativeProbability functions.

When sampled the constant distribution always returns its constant value.

constantDistribution Parameters

  • double: constant value

constantDistribution Returns

A probability distribution function.

constantDistribution Syntax

constantDistribution(constantValue)

conv

The conv function returns the convolution of two numeric arrays.

conv Parameters

  • numeric array

  • numeric array

conv Syntax

conv(numericArray1, numericArray2)

copyOf

The copyOf function creates a copy of a numeric array.

copyOf Parameters

  • numeric array

  • length: The length of the copied array. The returned array will be right padded with zeros if the length parameter exceeds the size of the original array.

copyOf Syntax

copyOf(numericArray, length)

copyOfRange

The copyOfRange function creates a copy of a range of a numeric array.

copyOfRange Parameters

  • numeric array

  • start index

  • end index

copyOfRange Syntax

copyOfRange(numericArray, startIndex, endIndex)

corr

The corr function returns the correlation of two numeric arrays or the correlation matrix for a matrix.

The corr function support Pearson’s, Kendall’s and Spearman’s correlations.

corr Positional Parameters

  • numeric array: The first numeric array

  • numeric array: The second numeric array

OR

  • matrix: The matrix to compute the correlation matrix for. Note that correlation is computed between the columns in the matrix.

corr Named Parameters

  • type: (Optional) The type of correlation. Possible values are pearsons, kendalls, or spearmans. The default is pearsons.

corr Syntax

corr(numericArray1, numericArray2) // Compute the Pearsons correlation for two numeric arrays
corr(numericArray1, numericArray2, type=kendalls) // Compute the Kendalls correlation for two numeric arrays
corr(matrix) // Compute the Pearsons correlation matrix for a matrix
corr(matrix, type=spearmans) // Compute the Spearmans correlation matrix for a matrix

corr Returns

number | matrix: Either the correlation or correlation matrix.

cos

The cos function returns the trigonometric cosine of a number.

cos Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the hyperbolic cosine of.

cos Syntax

cos(100.4)  // returns the arccosine of 100.4
cos(fieldA) // returns the arccosine for fieldA.
if(gt(fieldA,fieldB),cos(fieldA),cos(fieldB)) // if fieldA > fieldB then return the arccosine of fieldA, else return the cosine of fieldB

cosineSimilarity

The cosineSimilarity function returns the cosine similarity of two numeric arrays.

cosineSimilarity Parameters

  • numeric array

  • numeric array

cosineSimilarity Returns

A numeric.

cosineSimilarity Syntax

cosineSimilarity(numericArray, numericArray)

cov

The cov function returns the covariance of two numeric array or the covariance matrix for matrix.

cov Parameters

  • numeric array: The first numeric array

  • numeric array: The second numeric array

OR

  • matrix: The matrix to compute the covariance matrix from. Note that covariance is computed between the columns in the matrix.

cov Syntax

cov(numericArray, numericArray) // Computes the covariance of a two numeric arrays
cov(matrix) // Computes the covariance matrix for the matrix.

cov Returns

number | matrix: Either the covariance or covariance matrix.

cumulativeProbability

The cumulativeProbability function returns the cumulative probability of a random variable within a probability distribution. The cumulative probability is the total probability of all random variables less then or equal to a random variable.

cumulativeProbability Parameters

  • probability distribution

  • number: Value to compute the probability for.

cumulativeProbability Returns

A double: the cumulative probability.

cumulativeProbability Syntax

cumulativeProbability(normalDistribution(500, 25), 502) // Returns the cumulative probability of the random sample 502 in a normal distribution with a mean of 500 and standard deviation of 25.

derivative

The derivative function returns the derivative of a function. The derivative function can compute the derivative of the spline function and the loess function. The derivative can also take the derivative of a derivative.

derivative Parameters

  • spline | loess | derivative: The functions to compute the derivative for.

derivative Syntax

derivative(spline(...))
derivative(loess(...))
derivative(derivative(...))

derivative Returns

function: The function can be treated as both a numeric array and function.

describe

The describe function returns a tuple containing the descriptive statistics for an array.

describe Parameters

  • numeric array

describe Syntax

describe(numericArray)

diff

The diff functions performs time series differencing.

Time series differencing is often used to make a time series stationary before further analysis.

diff Parameters

  • numeric array: The time series data.

  • integer: (Optional) The lag. Defaults to 1.

diff Syntax

diff(numericArray1) // Perform time series differencing with a default lag of 1.
diff(numericArray1, 30) // Perform time series differencing with a lag of 30.

diff Returns

numeric array: The differenced time series data. The size of the array will be equal to (original array size - lag).

distance

The distance function computes the distance of two numeric arrays or the distance matrix for a matrix.

distance Positional Parameters

  • numeric array: The first numeric array

  • numeric array: The second numeric array

OR

  • matrix: The matrix to compute the distance matrix for. Note that distance is computed between the columns in the matrix.

distance Named Parameters

  • type: (Optional) The distance type. Possible values are euclidean, manhattan, canberra, or earthMovers. The default is euclidean.

distance Syntax

distance(numericArray1, numuericArray2) // Computes the euclidean distance for two numeric arrays.
distance(numericArray1, numuericArray2, type=manhattan) // Computes the manhattan distance for two numeric arrays.
distance(matrix) // Computes the euclidean distance matrix for a matrix.
distance(matrix, type=canberra) // Computes the canberra distance matrix for a matrix.

distance Returns

number | matrix: Either the distance or distance matrix.

div

The div function will take two numeric values and divide them. The function will fail to execute if any of the values are non-numeric or null, or the 2nd value is 0. Returns a numeric value.

div Parameters

  • Field Name | Raw Number | Number Evaluator

  • Field Name | Raw Number | Number Evaluator

div Syntax

The expressions below show the various ways in which you can use the div evaluator. The first value will be divided by the second and as such the second cannot be 0.

div(1,2) // 1 / 2
div(1,fieldA) // 1 / fieldA
div(fieldA,1.4) // fieldA / 1.4
div(fieldA,add(fieldA,fieldB)) // fieldA / (fieldA + fieldB)

dotProduct

The dotProduct function returns the dotproduct of a numeric array.

dotProduct Parameters

  • numeric array

dotProduct Returns

A number.

dotProduct Syntax

dotProduct(numericArray)

ebeAdd

The ebeAdd function performs an element-by-element addition of two numeric arrays.

ebeAdd Parameters

  • numeric array

  • numeric array

ebeAdd Returns

A numeric array.

ebeAdd Syntax

ebeAdd(numericArray, numericArray)

ebeDivide

The ebeDivide function performs an element-by-element division of two numeric arrays.

ebeDivide Parameters

  • numeric array

  • numeric array

ebeDivide Returns

A numeric array.

ebeDivide Syntax

ebeDivide(numericArray, numericArray)

ebeMultiple

The ebeMultiply function performs an element-by-element multiplication of two numeric arrays.

ebeMultiply Parameters

  • numeric array

  • numeric array

ebeMultiply Returns

A numeric array.

ebeMultiply Syntax

ebeMultiply(numericArray, numericArray)

ebeSubtract

The ebeSubtract function performs an element-by-element subtraction of two numeric arrays.

ebeSubtract Parameters

  • numeric array

  • numeric array

ebeSubtract Returns

A numeric array.

ebeSubtract Syntax

ebeSubtract(numericArray, numericArray)

empiricalDistribution

The empiricalDistribution function returns empirical distribution function, a continuous probability distribution function based on an actual data set. This function is part of the probability distribution framework and is designed to work with the sample, kolmogorovSmirnov and cumulativeProbability functions.

This function is designed to work with continuous data. To build a distribution from a discrete data set use the enumeratedDistribution.

empiricalDistribution Parameters

  • numeric array: empirical observations

empiricalDistribution Returns

A probability distribution function.

empiricalDistribution Syntax

empiricalDistribution(numericArray)

enumeratedDistribution

The enumeratedDistribution function returns a discrete probability distribution function based on an actual data set or a pre-defined set of data and probabilities. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

The enumeratedDistribution can be called in two different scenarios:

1) Single array of discrete values. This works like an empirical distribution for discrete data.

2) An array of singleton discrete values and an array of double values representing the probabilities of the discrete values.

This function is designed to work with discrete data. To build a distribution from a continuous data set use the empiricalDistribution.

enumeratedDistribution Parameters

  • integer array: discrete observations or singleton discrete values.

  • double array: (Optional) values representing the probabilities of the singleton discrete values.

enumeratedDistribution Returns

A probability distribution function.

enumeratedDistribution Syntax

enumeratedDistribution(integerArray) // This creates an enumerated distribution from the observations in the numeric array.
enumeratedDistribution(array(1,2,3,4), array(.25,.25,.25,.25)) // This creates an enumerated distribution with four discrete values (1,2,3,4) each with a probability of .25.

eor

The eor function will return the logical exclusive or of at least two boolean parameters. The function will fail to execute if any parameters are non-boolean or null. Returns a boolean value.

eor Parameters

  • Field Name | Raw Boolean | Boolean Evaluator

  • Field Name | Raw Boolean | Boolean Evaluator

  • …​…​

  • Field Name | Raw Boolean | Boolean Evaluator

eor Syntax

The expressions below show the various ways in which you can use the eor evaluator. At least two parameters are required, but there is no limit to how many you can use.

eor(true,fieldA) // true iff fieldA is false
eor(fieldA,fieldB) // true iff either fieldA or fieldB is true but not both
eor(eq(fieldA,fieldB),eq(fieldC,fieldD)) // true iff either fieldA == fieldB or fieldC == fieldD but not both

eq

The eq function will return whether all the parameters are equal, as per Java’s standard equals(…​) function. The function accepts parameters of any type, but will fail to execute if all the parameters are not of the same type. That is, all are Boolean, all are String, or all are Numeric. If any any parameters are null and there is at least one parameter that is not null then false will be returned. Returns a boolean value.

eq Parameters

  • Field Name | Raw Value | Evaluator

  • Field Name | Raw Value | Evaluator

  • …​…​

  • Field Name | Raw Value | Evaluator

eq Syntax

The expressions below show the various ways in which you can use the eq evaluator.

eq(1,2) // 1 == 2
eq(1,fieldA) // 1 == fieldA
eq(fieldA,val(foo)) fieldA == "foo"
eq(add(fieldA,fieldB),6) // fieldA + fieldB == 6

expMovingAge

The expMovingAverage function computes an exponential moving average for a numeric array.

expMovingAge Parameters

  • numeric array: The array to compute the exponential moving average from.

  • integer: window size

expMovingAvg Returns

A numeric array. The first element of the returned array will start from the windowSize-1 index of the original array.

expMovingAvg Syntax

expMovingAvg(numericArray, 5) //Computes an exponential moving average with a window size of 5.

factorial

The factorial function returns the factorial of its parameter.

factorial Parameters

  • integer: The value to compute the factorial for. The largest supported value of this parameter is 170.

factorial Returns

A double.

factorial Syntax

factorial(100) //Computes the factorial of 100

finddelay

The finddelay function performs a cross-correlation between two numeric arrays and returns the delay.

finddelay Parameters

  • numeric array

  • numeric array

finddelay Syntax

finddelay(numericArray1, numericArray2)

floor

The floor function rounds a decimal value to the next lowest whole number.

floor Parameters

  • Field Name | Raw Number | Number Evaluator: The decimal to round down.

floor Syntax

The expressions below show the various ways in which you can use the floor evaluator.

floor(100.4) // returns 100.
ceil(fieldA) // returns the next lowestt whole number for fieldA.
if(gt(fieldA,fieldB),floor(fieldA),floor(fieldB)) // if fieldA > fieldB then return the floor of fieldA, else return the floor of fieldB.

freqTable

The freqTable function returns a frequency distribution from an array of discrete values.

This function is designed to work with discrete values. To work with continuous data use the hist function.

freqTable Parameters

  • integer array: The values to build the frequency distribution from.

freqTable Returns

A list of tuples containing the frequency information for each discrete value.

freqTable Syntax

freqTable(integerArray)

geometricDistribution

The geometricDistribution function returns a geometric probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

geometricDistribution Parameters

  • double: probability

geometricDistribution Syntax

geometricDistribution(.5) // Creates a geometric distribution with probability of .5

geometricDistribution Returns

A probability distribution function

gammaDistribution

The gammaDistribution function returns a gamma probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, kolmogorovSmirnov and cumulativeProbability functions.

gammaDistribution Parameters

  • double: shape

  • double: scale

gammaDistribution Returns

A probability distribution function,

gammaDistribution Syntax

gammaDistribution(1, 10)

grandSum

The grandSum function sums all the values in a matrix.

grandSum Parameters

  • matrix: The matrix to operate on.

grandSum Syntax

grandSum(matrix)

grandSum Returns

number: the sum of all the values in the matrix.

gt

The gt function will return whether the first parameter is greater than the second parameter. The function accepts numeric or string parameters, but will fail to execute if all the parameters are not of the same type. That is, all are String or all are Numeric. If any any parameters are null then an error will be raised. Returns a boolean value.

gt Parameters

  • Field Name | Raw Value | Evaluator

  • Field Name | Raw Value | Evaluator

gt Syntax

The expressions below show the various ways in which you can use the gt evaluator.

gt(1,2) // 1 > 2
gt(1,fieldA) // 1 > fieldA
gt(fieldA,val(foo)) // fieldA > "foo"
gt(add(fieldA,fieldB),6) // fieldA + fieldB > 6

gteq

The gteq function will return whether the first parameter is greater than or equal to the second parameter. The function accepts numeric and string parameters, but will fail to execute if all the parameters are not of the same type. That is, all are String or all are Numeric. If any any parameters are null then an error will be raised. Returns a boolean value.

gteq Parameters

  • Field Name | Raw Value | Evaluator

  • Field Name | Raw Value | Evaluator

gteq Syntax

The expressions below show the various ways in which you can use the gteq evaluator.

gteq(1,2) // 1 >= 2
gteq(1,fieldA) // 1 >= fieldA
gteq(fieldA,val(foo)) fieldA >= "foo"
gteq(add(fieldA,fieldB),6) // fieldA + fieldB >= 6

hist

The hist function creates a histogram from a numeric array. The hist function is designed to work with continuous variables.

hist Parameters

  • numeric array

  • bins: The number of bins in the histogram. Each returned tuple contains summary statistics for the observations that were within the bin.

hist Syntax

hist(numericArray, bins)

hsin

The hsin function returns the trigonometric hyperbolic sine of a number.

hsin Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the hyperbolic sine of.

hsin Syntax

hsin(100.4)  // returns the hsine of 100.4
hsin(fieldA) // returns the hsine for fieldA.
if(gt(fieldA,fieldB),sin(fieldA),sin(fieldB)) // if fieldA > fieldB then return the hsine of fieldA, else return the hsine of fieldB

if

The if function works like a standard conditional if/then statement. If the first parameter is true, then the second parameter will be returned, else the third parameter will be returned. The function accepts a boolean as the first parameter and anything as the second and third parameters. An error will occur if the first parameter is not a boolean or is null.

if Parameters

  • Field Name | Raw Value | Boolean Evaluator

  • Field Name | Raw Value | Evaluator

  • Field Name | Raw Value | Evaluator

if Syntax

The expressions below show the various ways in which you can use the if evaluator.

if(fieldA,fieldB,fieldC) // if fieldA is true then fieldB else fieldC
if(gt(fieldA,5), fieldA, 5) // if fieldA > 5 then fieldA else 5
if(eq(fieldB,null), null, div(fieldA,fieldB)) // if fieldB is null then null else fieldA / fieldB

length

The length function returns the length of a numeric array.

length Parameters

  • numeric array

length Syntax

length(numericArray)

loess

The leoss function is a smoothing curve fitter which uses a local regression algorithm. Unlike the spline function which touches each control point, the loess function puts a smooth curve through the control points without having to touch the control points. The loess result can be used by the derivative function to produce smooth derivatives from data that is not smooth.

loess Positional Parameters

  • numeric array: (Optional) x values. If omitted a sequence will be created for the x values.

  • numeric array: y values

loess Named Parameters

  • bandwidth: (Optional) The percent of the data points to use when drawing the local regression line, defaults to .25. Decreasing the bandwidth increases the number of curves that loess can fit.

  • robustIterations: (Optional) The number of iterations used to smooth outliers, defaults to 2.

loess Syntax

loess(yValues) // This creates the xValues automatically and fits a smooth curve through the data points.
loess(xValues, yValues) // This will fit a smooth curve through the data points.
loess(xValues, yValues, bandwidth=.15) // This will fit a smooth curve through the data points using 15 percent of the data points for each local regression line.

loess Returns

function: The function can be treated as both a numeric array of the smoothed data points and function.

log

The log function will return the natural log of the provided single parameter. The log function will fail to execute if the value is non-numeric. If a null value is found, then null will be returned as the result.

log Parameters

  • Field Name | Raw Number | Number Evaluator

log Syntax

The expressions below show the various ways in which you can use the log evaluator. Only one parameter is accepted. Returns a numeric value.

log(100)
log(add(fieldA,fieldB))
log(fieldA)

logNormalDistribution

The logNormalDistribution function returns a log normal probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, kolmogorovSmirnov and cumulativeProbability functions.

logNormalDistribution Parameters

  • double: shape

  • double: scale

logNormalDistribution Returns

A probability distribution function.

logNormalDistribution Syntax

logNormalDistribution(.3, .0)

kolmogorovSmirnov

The kolmogorovSmirnov function performs a Kolmogorov Smirnov test, between a reference continuous probability distribution and a sample set.

kolmogorovSmirnov Parameters

  • continuous probability distribution: Reference distribution

  • numeric array: sample set

kolmogorovSmirnov Returns

result tuple : A tuple containing the p-value and d-statistic for the test result.

kolmogorovSmirnov Syntax

kolmogorovSmirnov(normalDistribution(10, 2), sampleSet)

lt

The lt function will return whether the first parameter is less than the second parameter. The function accepts numeric or string parameters, but will fail to execute if all the parameters are not of the same type. That is, all are String or all are Numeric. If any any parameters are null then an error will be raised. Returns a boolean value.

lt Parameters

  • Field Name | Raw Value | Evaluator

  • Field Name | Raw Value | Evaluator

lt Syntax

The expressions below show the various ways in which you can use the lt evaluator.

lt(1,2) // 1 < 2
lt(1,fieldA) // 1 < fieldA
lt(fieldA,val(foo)) fieldA < "foo"
lt(add(fieldA,fieldB),6) // fieldA + fieldB < 6

lteq

The lteq function will return whether the first parameter is less than or equal to the second parameter. The function accepts numeric and string parameters, but will fail to execute if all the parameters are not of the same type. That is, all are String or all are Numeric. If any any parameters are null then an error will be raised. Returns a boolean value.

lteq Parameters

  • Field Name | Raw Value | Evaluator

  • Field Name | Raw Value | Evaluator

lteq Syntax

The expressions below show the various ways in which you can use the lteq evaluator.

lteq(1,2) // 1 <= 2
lteq(1,fieldA) // 1 <= fieldA
lteq(fieldA,val(foo)) fieldA <= "foo"
lteq(add(fieldA,fieldB),6) // fieldA + fieldB <= 6

markovChain

The markovChain function can be used to perform Markov Chain simulations. The markovChain function takes as its parameter a transition matrix and returns a mathematical model that can be sampled using the sample function. Each sample taken from the Markov Chain represents the current state of system.

markovChain Parameters

  • matrix: Transition matrix

markovChain Syntax

sample(markovChain(transitionMatrix), 5)  // This creates a Markov Chain given a specific transition matrix. The sample function takes 5 samples from the Markov Chain, representing the next five states of the system.

markovChain Returns

Markov Chain model: The Markoff Chain model can be used with sample function.

matrix

The matrix function returns a matrix which can be operated on by functions that support matrix operations.

matrix Parameters

  • numeric array …​: One or more numeric arrays that will be the rows of the matrix.

matrix Syntax

matrix(numericArray1, numericArray2, numericArray3) // Returns a matrix with three rows of data: numericaArray1, numericArray2, numericArray3

matrix Returns

matrix

meanDifference

The meanDifference function calculates the mean of the differences following the element-by-element subtraction between two numeric arrays.

meanDifference Parameters

  • numeric array

  • numeric array

meanDifference Returns

A numeric.

meanDifference Syntax

meanDifference(numericArray, numericArray)

minMaxScale

The minMaxScale function scales numeric arrays within a minimum and maximum value. By default minMaxScale scales between 0 and 1. The minMaxScale function can operate on both numeric arrays and matrices.

When operating on a matrix the minMaxScale function operates on each row of the matrix.

minMaxScale Parameters

  • numeric array | matrix: The array or matrix to scale

  • double: (Optional) The min value. Defaults to 0.

  • double: (Optional) The max value. Defaults to 1.

minMaxScale Syntax

minMaxScale(numericArray) // scale a numeric array between 0 and 1
minMaxScale(numericArray, 0, 100) // scale a numeric array between 1 and 100
minMaxScale(matrix) // Scale each row in a matrix between 0 and 1
minMaxScale(matrix, 0, 100) // Scale each row in a matrix between 0 and 100

minMaxScale Returns

A numeric array or matrix

mod

The mod function returns the remainder (modulo) of the first parameter divided by the second parameter.

mod Parameters

  • Field Name | Raw Number | Number Evaluator: Parameter 1

  • Field Name | Raw Number | Number Evaluator: Parameter 2

mod Syntax

The expressions below show the various ways in which you can use the mod evaluator.

mod(100,3) // returns the remainder of 100 / 3 .
mod(100,fieldA) // returns the remainder of 100 divided by the value of fieldA.
mod(fieldA,1.4) // returns the remainder of fieldA divided by 1.4.
if(gt(fieldA,fieldB),mod(fieldA,fieldB),mod(fieldB,fieldA)) // if fieldA > fieldB then return the remainder of fieldA/fieldB, else return the remainder of fieldB/fieldA.

monteCarlo

The monteCarlo function performs a Monte Carlo simulation (https://en.wikipedia.org/wiki/Monte_Carlo_method) based on its parameters. The monteCarlo function runs another function a specified number of times and returns the results.

The function being run typically has one or more variables that are drawn from probability distributions on each run. The sample function is used in the function to draw the samples.

The simulation’s result array can then be treated as an empirical distribution to understand the probabilities of the simulation results.

monteCarlo Parameters

  • numeric function: The function being run by the simulation, which must return a numeric value.

  • integer: The number of times to run the function.

monteCarlo Returns

A numeric array: The results of simulation runs.

monteCarlo Syntax

let(a=uniformIntegerDistribution(1, 6),
    b=uniformIntegerDistribution(1, 6),
    c=monteCarlo(add(sample(a), sample(b)), 1000))

In the expression above the monteCarlo function is running the function add(sample(a), sample(b)) 1000 times and returning the result. Each time the function is run samples are drawn from the probability distributions stored in variables a and b.

movingAvg

The movingAvg function calculates a moving average over an array of numbers.

movingAvg Parameters

  • numeric array

  • window size

movingAvg Returns

A numeric array. The first element of the returned array will start from the windowSize-1 index of the original array.

movingAvg Syntax

movingAverage(numericArray, 30)

movingMedian

The movingMedian function calculates a moving median over an array of numbers.

movingMedian Parameters

  • numeric array

  • window size

movingMedian Returns

A numeric array. The first element of the returned array will start from the windowSize-1 index of the original array.

movingMedian Syntax

movingMedian(numericArray, 30)

mult

The mult function will take two or more numeric values and multiply them together. The mult function will fail to execute if any of the values are non-numeric. If a null value is found then null will be returned as the result.

mult Parameters

  • Field Name | Raw Number | Number Evaluator

  • Field Name | Raw Number | Number Evaluator

  • …​…​

  • Field Name | Raw Number | Number Evaluator

mult Syntax

The expressions below show the various ways in which you can use the mult evaluator. The number and order of these parameters do not matter and is not limited except that at least two parameters are required. Returns a numeric value.

mult(1,2,3,4) // 1 * 2 * 3 * 4
mult(1,fieldA) // 1 * value of fieldA
mult(fieldA,1.4) // value of fieldA * 1.4
mult(fieldA,fieldB,fieldC) // value of fieldA * value of fieldB * value of fieldC
mult(fieldA,div(fieldA,fieldB)) // value of fieldA * (value of fieldA / value of fieldB)
mult(fieldA,if(gt(fieldA,fieldB),fieldA,fieldB)) // if fieldA > fieldB then fieldA * fieldA, else fieldA * fieldB

normalDistribution

The normalDistribution function returns a normal probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, kolmogorovSmirnov and cumulativeProbability functions.

normalDistribution Parameters

  • double: mean

  • double: standard deviation

normalDistribution Returns

A probability distribution function.

normalDistribution Syntax

normalDistribution(mean, stddev)

normalizeSum

The normalizeSum function scales numeric arrays so that they sum to 1. The normalizeSum function can operate on both numeric arrays and matrices.

When operating on a matrix the normalizeSum function operates on each row of the matrix.

normalizeSum Parameters

  • numeric array | matrix

normalizeSum Syntax

normalizeSum(numericArray)
normalizeSum(matrix)

normalizeSum Returns

numeric array | matrix

not

The not function will return the logical NOT of a single boolean parameter. The function will fail to execute if the parameter is non-boolean or null. Returns a boolean value.

not Parameters

  • Field Name | Raw Boolean | Boolean Evaluator

not Syntax

The expressions below show the various ways in which you can use the not evaluator. Only one parameter is allowed.

not(true) // false
not(fieldA) // true if fieldA is false else false
not(eq(fieldA,fieldB)) // true if fieldA != fieldB

olsRegress

The olsRegress function performs ordinary least squares, multivariate, linear regression.

The olsRegress function returns a single Tuple containing the regression model with estimated regression parameters, RSquared and regression diagnostics.

The output of olsRegress can be used with the predict function to predict values based on the regression model.

olsRegress Parameters

  • matrix: The regressor observation matrix. Each row in the matrix represents a single multi-variate regressor observation. Note that there is no need to add an initial unitary column (column of 1’s) when specifying a model including an intercept term, this column will be added automatically.

  • numeric array: The outcomes array which matches up with each row in the regressor observation matrix.

olsRegress Syntax

olsRegress(matrix, numericArray) // This performs the olsRegression analysis on given regressor matrix and outcome array.

olsRegress Returns

Tuple: The regression model including the estimated regression parameters and diagnostics.

or

The or function will return the logical OR of at least 2 boolean parameters. The function will fail to execute if any parameters are non-boolean or null. Returns a boolean value.

or Parameters

  • Field Name | Raw Boolean | Boolean Evaluator

  • Field Name | Raw Boolean | Boolean Evaluator

  • …​…​

  • Field Name | Raw Boolean | Boolean Evaluator

or Syntax

The expressions below show the various ways in which you can use the or evaluator. At least two parameters are required, but there is no limit to how many you can use.

or(true,fieldA) // true || fieldA
or(fieldA,fieldB) // fieldA || fieldB
or(and(fieldA,fieldB),fieldC) // (fieldA && fieldB) || fieldC
or(fieldA,fieldB,fieldC,and(fieldD,fieldE),fieldF)

poissonDistribution

The poissonDistribution function returns a poisson probability distribution based on its parameter. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

poissonDistribution Parameters

  • double: mean

poissonDistribution Returns

A probability distribution function.

poissonDistribution Syntax

poissonDistribution(mean)

polyFit

The polyFit function performs polynomial curve fitting.

polyFit Parameters

  • numeric array: (Optional) x values. If omitted a sequence will be created for the x values.

  • numeric array: y values

  • integer: (Optional) polynomial degree. Defaults to 3.

polyFit Returns

A numeric array: curve that was fit to the data points.

polyFit Syntax

polyFit(yValues) // This creates the xValues automatically and fits a curve through the data points using the default 3 degree polynomial.
polyFit(yValues, 5) // This creates the xValues automatically and fits a curve through the data points using a 5 degree polynomial.
polyFit(xValues, yValues, 5) // This will fit a curve through the data points using a 5 degree polynomial.

pow

The pow function returns the value of its first parameter raised to the power of its second parameter.

pow Parameters

  • Field Name | Raw Number | Number Evaluator: Parameter 1

  • Field Name | Raw Number | Number Evaluator: Parameter 2

pow Syntax

The expressions below show the various ways in which you can use the pow evaluator.

pow(2,3) // returns 2 raised to the 3rd power.
pow(4,fieldA) // returns 4 raised by the value of fieldA.
pow(fieldA,1.4) // returns the value of fieldA raised by 1.4.
if(gt(fieldA,fieldB),pow(fieldA,fieldB),pow(fieldB,fieldA)) // if fieldA > fieldB then raise fieldA by fieldB, else raise fieldB by fieldA.

predict

The predict function predicts the value of dependent variables based on regression models or functions.

The predict function can predict values based on the output of the following functions: spline, loess, regress, olsRegress.

predict Parameters

  • regression model | function: The model or function used for the prediction

  • number | numeric array | matrix: Depending on the regression model or function used, the predictor variable can be a number, numeric array or matrix.

predict Syntax

predict(regressModel, number) // predict using the output of the <<regress>> function and single numeric predictor. This will return a single numeric prediction.

predict(regressModel, numericArray) // predict using the output of the <<regress>> function and a numeric array of predictors. This will return a numeric array of predictions.

predict(splineFunc, number) // predict using the output of the <<spline>> function and single numeric predictor. This will return a single numeric prediction.

predict(splineFunc, numericArray) // predict using the output of the <<spline>> function and a numeric array of predictors. This will return a numeric array of predictions.

predict(olsRegressModel, numericArray) // predict using the output of the <<olsRegress>> function and a numeric array containing one multi-variate predictor. This will return a single numeric prediction.

predict(olsRegressModel, matrix) // predict using the output of the <<olsRegress>> function and a matrix containing rows of multi-variate predictor arrays. This will return a numeric array of predictions.

primes

The primes function returns an array of prime numbers starting from a specified number.

primes Parameters

  • integer: The number of primes to return in the list

  • integer: The starting point for returning the primes

primes Returns

A numeric array.

primes Syntax

primes(100, 2000) // returns 100 primes starting from 2000

probability

The probability function returns the probability of a random variable within a probability distribution.

The probability function computes the probability between random variable ranges for both continuous and discrete probability distributions.

The probability function can compute probabilities for a specific random variable for discrete probability distributions only.

probability Parameters

  • probability distribution: the probability distribution to compute the probability from.

  • number: low value of the range.

  • number: (Optional for discrete probability distributions) high value of the range. If the high range is omitted then the probability function will compute a probability for the low range value.

probability Syntax

probability(poissonDistribution(10), 7) // Returns the probability of a random sample of 7 in a poisson distribution with a mean of 10.

probability(normalDistribution(10, 2), 7.5, 8.5) // Returns the probability between the range of 7.5 to 8.5 for a normal distribution with a mean of 10 and standard deviation of 2.

probability Returns

double: probability

rank

The rank performs a rank transformation on a numeric array.

rank Parameters

  • numeric array

rank Syntax

rank(numericArray)

raw

The raw function will return whatever raw value is the parameter. This is useful for cases where you want to use a string as part of another evaluator.

raw Parameters

  • Raw Value

raw Syntax

The expressions below show the various ways in which you can use the raw evaluator. Whatever is inside will be returned as-is. Internal evaluators are considered strings and are not evaluated.

raw(foo) // "foo"
raw(count(*)) // "count(*)"
raw(45) // 45
raw(true) // "true" (note: this returns the string "true" and not the boolean true)
eq(raw(fieldA), fieldA) // true if the value of fieldA equals the string "fieldA"

regress

The regress function performs a simple regression of two numeric arrays.

The result of this expression is also used by the predict function.

regress Parameters

  • numeric array

  • numeric array

regress Syntax

regress(numericArray1, numericArray2)

rev

The rev function reverses the order of a numeric array.

rev Parameters

  • numeric array

rev Syntax

rev(numericArray)

round

The round function returns the closest whole number to the argument.

round Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the square root of.

round Syntax

round(100.4)
round(fieldA)
if(gt(fieldA,fieldB),sqrt(fieldA),sqrt(fieldB)) // if fieldA > fieldB then return the round of fieldA, else return the round of fieldB

sample

The sample function can be used to draw random samples from a probability distribution or Markov Chain.

sample Parameters

  • probability distribution | Markov Chain: The distribution or Markov Chain to sample.

  • integer: (Optional) Sample size. Defaults to 1.

sample Returns

Either a single numeric random sample, or a numeric array depending on the sample size parameter.

sample Syntax

sample(poissonDistribution(5)) // Returns a single random sample from a poissonDistribution with mean of 5.
sample(poissonDistribution(5), 1000) // Returns 1000 random samples from poissonDistribution with a mean of 5.
sample(markovChain(transitionMatrix), 1000) // Returns 1000 random samples from a Markov Chain.

scalarAdd

The scalarAdd function adds a scalar value to every value in a numeric array or matrix. When working with numeric arrays, scalarAdd returns a new array with the new values. When working with a matrix, scalarAdd returns a new matrix with new values.

scalarAdd Parameters

number: value to add numeric array | matrix: the numeric array or matrix to add the value to.

scalarAdd Syntax

scalarAdd(number, numericArray) // Adds the number to each element in the number in the array.
scalarAdd(number, matrix) // Adds the number to each value in a matrix

scalarAdd Returns

numericArray | matrix: Depending on what is being operated on.

scalarDivide

The scalarDivide function divides each number in numeric array or matrix by a scalar value. When working with numeric arrays, scalarDivide returns a new array with the new values. When working with a matrix, scalarDivide returns a new matrix with new values.

scalarDivide Parameters

number: value to divide by numeric array | matrix: the numeric array or matrix to divide by the value to.

scalarDivide Syntax

scalarDivide(number, numericArray) // Divides each element in the numeric array by the number.
scalarDivide(number, matrix) // Divides each element in the matrix by the number.

scalarDivide Returns

numericArray | matrix: depending on what is being operated on.

scalarMultiply

The scalarMultiply function multiplies each element in a numeric array or matrix by a scalar value. When working with numeric arrays, scalarMultiply returns a new array with the new values. When working with a matrix, scalarMultiply returns a new matrix with new values.

scalarMultiply Parameters

number: value to divide by numeric array | matrix: the numeric array or matrix to divide by the value to.

scalarMultiply Syntax

scalarMultiply(number, numericArray) // Multiplies each element in the numeric array by the number.
scalarMultiply(number, matrix) // Multiplies each element in the matrix by the number.

scalarMultiply Returns

numericArray | matrix: depending on what is being operated on

scalarSubtract

The scalarSubtract function subtracts a scalar value from every value in a numeric array or matrix. When working with numeric arrays, scalarSubtract returns a new array with the new values. When working with a matrix, scalarSubtract returns a new matrix with new values.

scalarSubtract Parameters

number: value to add numeric array | matrix: the numeric array or matrix to subtract the value from.

scalarSubtract Syntax

scalarSubtract(number, numericArray) // Subtracts the number from each element in the number in the array.
scalarSubtract(number, matrix) // Subtracts the number from each value in a matrix

scalarSubtract Returns

numericArray | matrix: depending on what is being operated on.

scale

The scale function multiplies all the elements of an array by a number.

scale Parameters

  • number

  • numeric array

scale Syntax

scale(number, numericArray)

sequence

The sequence function returns an array of numbers based on its parameters.

sequence Parameters

  • length

  • start

  • stride

sequence Syntax

sequence(100, 0, 1) // Returns a sequence of length 100, starting from 0 with a stride of 1.

sin

The sin function returns the trigonometric sine of a number.

sin Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the sine of.

sin Syntax

sin(100.4)  // returns the sine of 100.4
sine(fieldA) // returns the sine for fieldA.
if(gt(fieldA,fieldB),sin(fieldA),sin(fieldB)) // if fieldA > fieldB then return the sine of fieldA, else return the sine of fieldB

spline

The spline function performs a cubic spline interpolation (https://en.wikiversity.org/wiki/Cubic_Spline_Interpolation) of a curve given a set of x,y coordinates. The return value of the spline function is an interpolation function which can be used to predict values along the curve and generate a derivative of the curve.

spline Parameters

  • numeric array: (Optional) x values. If omitted a sequence will be created for the x values.

  • numeric array: y values

spline Syntax

spline(yValues) // This creates the xValues automatically and fits a spline through the data points.
spline(xValues, yValues) // This will fit a spline through the data points.

spline Returns

function: the function can be treated as both a numeric array and function.

sqrt

The sqrt function returns the trigonometric square root of a number.

sqrt Parameters

  • Field Name | Raw Number | Number Evaluator: The value to return the square root of.

sqrt Syntax

sqrt(100.4)  // returns the square root of 100.4
sqrt(fieldA) // returns the square root for fieldA.
if(gt(fieldA,fieldB),sqrt(fieldA),sqrt(fieldB)) // if fieldA > fieldB then return the sqrt of fieldA, else return the sqrt of fieldB

standardize

The standardize function standardizes a numeric array so that values within the array have a mean of 0 and standard deviation of 1.

standardize Parameters

  • numeric array: the array to standardize

standardize Syntax

standardize(numericArray)

standardize Returns

numeric array: the standardized values

sub

The sub function will take 2 or more numeric values and subtract them, from left to right. The sub function will fail to execute if any of the values are non-numeric. If a null value is found then null will be returned as the result.

sub Parameters

  • Field Name | Raw Number | Number Evaluator

  • Field Name | Raw Number | Number Evaluator

  • …​…​

  • Field Name | Raw Number | Number Evaluator

sub Syntax

The expressions below show the various ways in which you can use the sub evaluator. The number of these parameters does not matter and is not limited except that at least two parameters are required. Returns a numeric value.

sub(1,2,3,4) // 1 - 2 - 3 - 4
sub(1,fieldA) // 1 - value of fieldA
sub(fieldA,1.4) // value of fieldA - 1.4
sub(fieldA,fieldB,fieldC) // value of fieldA - value of fieldB - value of fieldC
sub(fieldA,div(fieldA,fieldB)) // value of fieldA - (value of fieldA / value of fieldB)
if(gt(fieldA,fieldB),sub(fieldA,fieldB),sub(fieldB,fieldA)) // if fieldA > fieldB then fieldA - fieldB, else fieldB - field

sumDifference

The sumDifference function calculates the sum of the differences following an element-by-element subtraction between two numeric arrays.

sumDifference Parameters

  • numeric array

  • numeric array

sumDifference Returns

A numeric.

sumDifference Syntax

sumDifference(numericArray, numericArray)

sumColumns

The sumColumns function sums the columns in a matrix and returns a numeric array with the result.

sumColumns Parameters

  • matrix: the matrix to operate on

sumColumns Syntax

sumColumns(matrix)

sumColumns Returns

numeric array: the sum of the columns

sumRows

The sumRows function sums the rows in a matrix and returns a numeric array with the result.

sumRows Parameters

  • matrix: the matrix to operate on

sumRows Syntax

sumRows(matrix)

sumRows Returns

numeric array: sum of the rows.

transpose

The transpose function transposes a matrix .

transpose Parameters

  • matrix: the matrix to transpose

transpose Syntax

transpose(matrix)

transpose Returns

matrix: the transposed matrix

triangularDistribution

The triangularDistribution function returns a triangular probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

triangularDistribution Parameters

  • double: low value

  • double: most likely value

  • double: high value

triangularDistribution Syntax

triangularDistribution(10, 15, 20) // A triangular distribution with a low value of 10, most likely value of 15 and high value of 20.

triangularDistribution Returns

Probability distribution function

uniformDistribution

The uniformDistribution function returns a continuous uniform probability distribution based on its parameters. See the uniformIntegerDistribution to work with discrete uniform distributions. This function is part of the probability distribution framework and is designed to work with the sample and cumulativeProbability functions.

uniforDistribution Parameters

  • double: start

  • double: end

uniformDistribution Returns

Probability distribution function.

uniformDistribution Syntax

uniformDistribution(0.0, 100.0)

uniformIntegerDistribution

The uniformIntegerDistribution function returns a discrete uniform probability distribution based on its parameters. See the uniformDistribution to work with continuous uniform distributions. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

uniformIntegerDistribution Parameters

  • integer: start

  • integer: end

uniformIntegerDistribution Returns

A probability distribution function.

uniformIntegerDistribution Syntax

uniformDistribution(1, 6)

unitize

The unitize function scales numeric arrays to a magnitude of 1, often called unit vectors. The unitize function can operate on both numeric arrays and matrices.

When operating on a matrix the unitize function unitizes each row of the matrix.

unitize Parameters

  • numeric array | matrix: The array or matrix to unitize

unitize Syntax

unitize(numericArray) // Unitize a numeric array
unitize(matrix) // Unitize each row in a matrix

unitize Returns

numeric array | matrix

weibullDistribution

The weibullDistribution function returns a Weibull probability distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, kolmogorovSmirnov and cumulativeProbability functions.

weibullDistribution Parameters

  • double: shape

  • double: scale

weibullDistribution Returns

A probability distribution function.

weibullDistribution Syntax

weibullDistribution(.5, 10)

zipFDistribution

The zipFDistribution function returns a ZipF distribution based on its parameters. This function is part of the probability distribution framework and is designed to work with the sample, probability and cumulativeProbability functions.

zipFDistribution Parameters

  • integer: size

  • double: exponent

zipFDistribution Returns

A probability distribution function.

zipFDistribution Syntax

zipFDistribution(5000, 1.0)
Comments on this Page

We welcome feedback on Solr documentation. However, we cannot provide application support via comments. If you need help, please send a message to the Solr User mailing list.